wheel cylinders....

npca-dealer · Post by **npca-dealer** » Tue Oct 07, 2003 3:57 pm

fud: i really need a pair of rear wheel cylinders for a 69 L60 patrol....please let me know...thank, dealer.

npca-fud · Post by **npca-fud** » Tue Oct 07, 2003 6:06 pm

I have rebuilt ones and parts to rebuild them, my rebuilt ones are solid and so are the parts but they are used not new. Aftermarket ones are out of stock currently but some coming in soon, all rear cylinders are currently very hard to come by so price is a reflection of how hard a part is to find. Other parts that are not so hard to find I have at a lower cost. A lot of people have been emailing me for these and if you are not seriously interested please do not waste my time as I am very busy these days.... you can email me at fuddruckers@earthlink.net

npca-bigjhoov · Post by **npca-bigjhoov** » Mon Oct 13, 2003 12:22 am

Anybody have part #'s for the front wheel cylinders? Also any suggestions for a broken door hinge pin? Thanks, Jerry

npca-fud · Post by **npca-fud** » Mon Oct 13, 2003 2:23 am

Chris at Santa Cruiz Nissan is your man for front cylinders. Email him here cdavid@sc-superstore.com he is a Patrol owner and works in parts. I can not say enough nice things about him, he really kicks butt. Thanks for all the free stuff Chris, hope to shake your hand some day! For the hinge...if it not rusty pound it out in vise with a punch. Then pound in a new pin. If rusted take it to a welder and he will punch it out with a drill press then put in new pin. I just had this done to all 4 recently and they are as good as new. Also check the hinge backing plate located in the body. The lower one is usually rusted badly. I had these made and replaced all of them then used thread lock on it all when I put it back together, should last another 20 years now!

npca-aptos-patrol · Post by **npca-aptos-patrol** » Mon Oct 13, 2003 2:41 pm

; Jerry; ; The part #'s for the front wheel cylinders are ; 41111-35003 (need 2) and 41113-35003 (need 2).; I just made an inquiry to Nissan and these are ; going fast.; ; Looks like I can only order 4 more of the ; 41111-35003 and no more of the 41113-35003 but these can be put on back order ; which is; still a good sign. I have been lucky to get back ; order parts when they still show up as a good part #. They just take ; awhile.; ; Chris at Santa Cruz Nissan; ; ----- Original Message ----- ; From: ; bigjhoov ; ; To: Nissan Patrol Club ; Albuquerque ; Sent: Sunday, October 12, 2003 9:22 ; PM; Subject: Re: wheel cylinders....; ; ; ; ; New Message on Nissan Patrol ; Club Albuquerque; ; ; wheel ; cylinders....; ; ; ; Reply; ; ; ; ; ; Reply to Sender Recommend ; Message 12 in ; Discussion ; ; ; ; ; ; From: bigjhoov ; ; ; Anybody have part #'s for the front wheel cylinders? Also ; any suggestions for a broken door hinge pin? Thanks, ; JerryView other groups in this ; category.

npca-4x4xjonx4x4 · Post by **npca-4x4xjonx4x4** » Mon Oct 13, 2003 7:19 pm

; Dont know what to tell you on the wheel cylinders...But I suggest finding the diameter, drilling out the broken ones, and replacing them with pieces or rod with the right diameter you can get at the hardware store...Hope this helps... Surf and talk on the phone at the same time with broadband Internet access. Get high-speed for as low as $29.95/month.* . *Depending on the local service providers in your area.