Restoring 1969 patrol in northern CA

[ckeene]

IMG_9095.JPG

IMG_9098.JPG

IMG_9097.JPG

IMG_9100.JPG

IMG_9096.JPG

IMG_9103.JPG

IMG_9102.JPG

New member here!

My dad's old hunting jeep is being restored to working order. Our mechanic cannot find these parts. Anyone know where I can get them?

- wheel cylinders for all four corners
- slave cylinder for clutch
- master cylinder for clutch
- master cylinder for brakes

any help is much appreciated!!
thank you

[mdawg4x4]

I recently bought these. Don't have them bled and adjusted yet.
http://www.ebay.com.au/itm/Front-Brake- ... Sw9mFWHLpQ

http://www.ebay.com.au/itm/Rear-Brake-S ... SwI-BWGvrl


Did not buy this and read on here may be some compatibility issue here in the US.
http://www.ebay.com.au/itm/Brake-Master ... Swd4tUKj7m

[Esteban]

Congratulations on the work done. It's looking great!

...
Did not buy this and read on here may be some compatibility issue here in the US.
http://www.ebay.com.au/itm/Brake-Master ... Swd4tUKj7m

Regarding this master cylinder, besides being a double circuit which is good, will be the fact that the connections are metric (judging from the models that it applies), so the brake line nipples will need to be changed. I think member moore_rb has it installed

A Wilwood master cylinder has been installed by member jwgreen. It requires slotting the mounting holes since the spacing is different. You can read about it here:

http://www.60patrol.com/forum/viewtopic ... ood#p26526

And this is the Wilwood link:
http://www.wilwood.com/Search/PartNoSea ... q=260-8794

Hope somebody else chimes about the clutch cylinders.

[RiverPatrol]

Welcome to 60Patrol! Nice work on the family Patrol! It will be awesome to have it being used again. Keep us posted on the progress.

[ckeene]

Thank you all! If anyone has info on other parts, please let me know.

[L60Boerne]

Well done!

Love N California, few people know how special it is up there.

OEM or after market Brake Master Cylinders do not exist unless you buy a donor vehicle. I first tried the dual cylinder "drop in" replacement from 4WD in Australia. Wasted $350. Then after other attempts I just sent it to Apple Hydraulics in Calverton NY. Talk to Lazar at 631-369-9515. For $200 they will fix whatever problems it has. That would be my 100% advice.

Best carb guys are Carbs Unlimited in Auburn WA. Talk to Bob at 253-833-4106.

That is what my dollars have learnt me......aside from this forum, whom are the best people on earth. If we had this in Washington ...wow what a country it would be!

L60Boerne