Page 1 of 2
frame # location/rubber windshield rests
Posted: Sat Mar 24, 2007 2:36 pm
by npca-ragu
This message has been deleted by the author.
frame # location/rubber windshield rests
Posted: Sun Mar 25, 2007 1:33 pm
by npca-patrolcrazy1
frame# is stamped on the right frameside member at the front end,and the engine s.n.is on the right side of cylinder block,front lower corner
frame # location/rubber windshield rests
Posted: Sun Mar 25, 2007 2:46 pm
by npca-67l60
the vin plate will have the year stamped in it the one on fire wall hood bumpers obsolete time to try to find something that will work
frame # location/rubber windshield rests
Posted: Sun Mar 25, 2007 10:24 pm
by npca-ragu
This message has been deleted by the author.
frame # location/rubber windshield rests
Posted: Mon Mar 26, 2007 11:40 am
by npca-abuelo442
You can find the chassis number stamped on top of the right hand side of the chassis frame, looking inside the engine compartment. It's very close to where the exhaust pipe is located. You will need to clean that part of the frame member to find the numbers.I will try to find some info regarding years and numbers.
frame # location/rubber windshield rests
Posted: Thu Mar 29, 2007 9:33 pm
by npca-ragu
This message has been deleted by the author.
frame # location/rubber windshield rests
Posted: Thu Mar 29, 2007 9:40 pm
by npca-ragu
This message has been deleted by the author.
frame # location/rubber windshield rests
Posted: Fri Mar 30, 2007 7:24 am
by npca-danetteandkeith
Here are a few examples of 1962 Vin 's 1962 L60 L60-2-00101A 1962 KL60 L60-2-00675 Here are a few examples of a 1964 Vin. 's 1964 KL60 4L60-02328C 1964 L60 "Hogan" 4L60-01116
frame # location/rubber windshield rests
Posted: Fri Mar 30, 2007 11:54 am
by npca-ragu
This message has been deleted by the author.
frame # location/rubber windshield rests
Posted: Fri Mar 30, 2007 11:32 pm
by npca-63patrol
If it works, I would be a customer for you. I have a 63 but no windshield rests. Do you think you will be able to make some extras?