60Patrol

The are straight. Your picture is good and shows the bend clearly. You’ll have to fabricate the open limiters that attach at the bottom. Very simple to made. Once they brake the doors will open more than needed and cause that bend depending on how hard the door opens. E- Thank you for your help AGA...

So project continues slowly but steadily. I have completed much of the body work and now I am starting the door fitting process. I Have a quick question for you all. All four of my door hinges have a slight bend to them. Does anybody know if this is intentional or the result of wear and tear. I can ...

So apparently, the doors I was hoping to acquire won't work for my 1966. Does anyone have a set of doors that they are willing to part with?

RiverPatrol wrote:Great that you're making progress! Sorry, the doors are not interchangeable from '65 to '66. Different latches entirely, can't be swapped over to work. Save yourself the trip.

Thanks for the heads-up. Exactly the info I was looking for.

So I am going to resurrect this thread. It's been over year since my last post. But I haven't given up on the project. The motor has been rebuilt now it runs and I plowing through in the body work. Waiting for the temperature in my shop to rise enough to be able to spray primer. Today's question is ...

Just an update on this topic. I just received the OEM seal for Amayama. NOt sure how many are left out there but they are available...

... I have the 2 Black/white wires going to the SW terminal, 1 black/yellow wire going to the S terminal, and the 1 black wire going to the B terminal wire. I had a modern solenoid wired in and it didn’t do this. According to the wiring diagram, I believe it’s wired correctly. Suggestions anyone? T...

I know there are some available from time to time on Ebay but unfortunately I don't seem to have a part number for the one I finally found and got to work :doh: :doh: EDIT I did some more digging and this may be a compatible one but I can not 100% confirm that. https://www.ebay.com/itm/83520-55011-...

any suggestions? Help...

Does anyone have this torque spec?