Page 1 of 1
Need Source for Gasket Set, HELP!!
Posted: Sun Mar 24, 2002 7:57 pm
by npca-vladimier
Mostly oil pan gasket and pushrod cover gasket. Any ideas?
Need Source for Gasket Set, HELP!!
Posted: Mon Mar 25, 2002 7:11 am
by npca-grant
These two have gasket kits for the P-40...prob with the P-40 is the pushrod cover is a little different, has an indented in it that the P does not have. But I belive it will work.
http://www.enginepowersource.com/html/e ... g/p40.html This place actually lists a gasket kit for the P engine, but I have never got a reply from any email I sent them.
http://www.tonghong.com/thnis2.htm - Last but not least, you can try this NISSAN dealer in AUS. They made the 60 series over they up till 1980. Thus they may still have the parts. They are the ones I got my lifters and springs from.
http://www.newcastlenissan.com/ Grant
Need Source for Gasket Set, HELP!!
Posted: Mon Mar 25, 2002 12:29 pm
by npca-vizsla
If you have a PPU241 motor try Sunston Equipment 714-241-0200.Same motor thats in older nissan fork lifts.