Page 1 of 1
A/C York compressor installation instructions needed
Posted: Tue Feb 16, 2021 7:25 pm
by ctcruiser
I Have a 1967 and i was wondering if anyone has any ideas on what is needed to install a York A/C compressor which will be used as an on board air system. Looking for suggestions, guidance, pictures on how and what is needed to accomplish the mounting of the compressor. Thanks in advance
Re: A/C York compressor installation instructions needed
Posted: Wed Feb 17, 2021 10:00 am
by RiverPatrol
I used to have a Patrol that had a York compressor installed on it. It actually had A/C but it didn't work and there were electrical issues to work out so I removed everything except the York with plans to do exactly what you want to do. I sold it before that ever happened though. They moved the alternator to the opposite side of the engine and mounted it where the alternator lives. This was a professional install done by a dealer vendor at the time. These are pics that I took of the setup.
DSCF0946.JPG
IMG_2120.JPG
P1010251-1.jpg
P1010252-1.jpg
P1010256.JPG
P1010257-1.jpg
P1010259-1.jpg
P1010260.JPG
Re: A/C York compressor installation instructions needed
Posted: Wed Feb 17, 2021 7:35 pm
by ctcruiser
Great pictures, do you know of anyone that might have tried to fabricate brackets or some plans to install that setup?
Re: A/C York compressor installation instructions needed
Posted: Wed Feb 17, 2021 9:50 pm
by RiverPatrol
ctcruiser wrote:Great pictures, do you know of anyone that might have tried to fabricate brackets or some plans to install that setup?
I do not, know of anyone. I'd check with some custom off road shops, they're always doing customizations. They're likely to have done a York compressor install on a Jeep for the very same reason.