Page 1 of 1
Tacoma wheel interchange
Posted: Mon Jan 20, 2020 11:31 pm
by Jonas
https://www.roadreadywheels.com/product ... -wheel-rim
Anyone know if these Tacoma Steel wheels will fit a 65 p60. 30mm offset seem right?
Re: Tacoma wheel interchange
Posted: Tue Jan 21, 2020 8:05 am
by richw
IMG_4861.jpg
IMG_4860.jpg
They fitted my '74.
These wheels are always cheap, I'm sure it's because new Tacomas are sold with fancy wheels so the steel ones are surplus.
Interestingly they didn't fit my 70 series Landcruiser, they fouled the front calipers. That was a wasted morning!
Re: Tacoma wheel interchange
Posted: Tue Jan 21, 2020 9:27 am
by moore_rb
The listing doesn't say whether they are +3mm-, or -30mm offset, but from RichW's picture, my eyeballs are guessing they are -30mm (1.2 inch) which means they have roughly 2.75 inch frontspacing, and 4.25 backspace... Should work fine on a 60 series patrol with stock brake drums
Re: Tacoma wheel interchange
Posted: Tue Jan 21, 2020 10:29 am
by richw
if you buy a set paint them straight away, preferably bead blasting off the rubbish coating that comes as standard first!
Re: Tacoma wheel interchange
Posted: Tue Jan 21, 2020 2:45 pm
by Jonas
Perfect Richw. Thats exactly what I needed to know.
I actually found a set of wheels off a 95 4 runner that I think will fit also. only $150 with tires.
Re: Tacoma wheel interchange
Posted: Tue Jan 21, 2020 8:53 pm
by Jonas
A44815A1-3AB9-48F8-A57D-A4852405EA73.jpeg
The old split ring wheels and the 4 runner wheels.
E70501C1-03F1-4680-8A04-FA4D73C3A1B9.jpeg
Re: Tacoma wheel interchange
Posted: Fri Jan 31, 2020 9:56 am
by moore_rb
Hey Mr Jonas...
I just looked at your posted pics above, and I'm pretty sure that the steel wheels that were on your Patrol are original '60-'66, 16x5 Nissan Patrol wheels. Those wheels are very rare, and someone may want them, so PLEASE don't send them to the scrap yard....
