Stant Radiator Cap 10206
Posted: Sat Sep 24, 2016 9:30 pm
I can confirm that the STANT 7lb Radiator Cap 10206 works perfect for the OEM Patrol radiator. I replaced my OEM cap with the STANT 10206 cap last week because the seal was worn out on my OEM cap. You will have to cut off about 3 or 4 mm from the locking tab on each side though. The STANT cap fit perfect with the 1" deep neck on the radiator. I searched for this STANT number on the forum but couldn't find it so if this is previously known info....sorry 
ShowMe
ShowMe