Page 1 of 2
U-cup cylinder seal alternative?
Posted: Thu Jul 14, 2016 10:31 am
by ctcruiser
p/n 44112-E5010
Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to
www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.
Re: U-cup cylinder seal alternative?
Posted: Thu Jul 14, 2016 11:50 am
by RiverPatrol
I think the seal is different for the rear cylinders? Most of us quit looking for those parts since the cylinders are readily available and inexpensive on eBay:
http://www.ebay.com/itm/331677862533?_t ... EBIDX%3AIT
Re: U-cup cylinder seal alternative?
Posted: Thu Jul 14, 2016 2:07 pm
by jwgreen
ctcruiser wrote:p/n 44112-E5010
Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to
http://www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.
I think I have a few of these in my stash. I won't be home for a week or so but when I get back I can check and see if you can wait that long.
Re: U-cup cylinder seal alternative?
Posted: Thu Jul 14, 2016 9:51 pm
by ctcruiser
jwgreen wrote:ctcruiser wrote:p/n 44112-E5010
Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to
http://www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.
I think I have a few of these in my stash. I won't be home for a week or so but when I get back I can check and see if you can wait that long.
I can wait, thank you very much that would be awesome...
Re: U-cup cylinder seal alternative?
Posted: Wed Jul 20, 2016 10:57 am
by jwgreen
Ok I located the ones in my stash. I do have the 6 you need plus 2 extras. I would like to have a full set as backup so lets do this. The part number on my packaging is 44112-E5001 purchased directly from Nissan Dealership. If you would try and see if they are still available then great, you can just order those. If not then let me know and I will send these out to you. How does that sound?
Re: U-cup cylinder seal alternative?
Posted: Wed Jul 20, 2016 11:51 am
by ctcruiser
Justin, can you verify the part number with a picture? , the part number that is listed is different than the one you mentioned.
Re: U-cup cylinder seal alternative?
Posted: Wed Jul 20, 2016 4:24 pm
by jwgreen
ctcruiser wrote:Justin, can you verify the part number with a picture? , the part number that is listed is different than the one you mentioned.
But of course I can.
image.jpg
Re: U-cup cylinder seal alternative?
Posted: Fri Jul 22, 2016 8:29 am
by jwgreen
I just checked really quick and found some for sale on Amayama. They are not original Nissan but should work.
https://www.amayama.com/en/search?regio ... 4112-e5001
Re: U-cup cylinder seal alternative?
Posted: Fri Jul 22, 2016 10:33 am
by jwgreen
Took some measurements from the ones I bought.
IMG_2506.JPG
IMG_2507.JPG
IMG_2508.JPG
IMG_2509.JPG
Re: U-cup cylinder seal alternative?
Posted: Wed Aug 03, 2016 9:58 am
by Esteban
I was looking yesterday at a set of wheel cylinder seals that I have (they were misplaced and found them yesterday
) They're in a box from the manufacturer, SEIKEN with the following reference:
4518R - 1"
Please note that Seiken is the original manufacturer for the brake seals in the Patrol.
Wheel Cylinder Seal Cups.jpg
If you do a search with the reference above, they are available at Amazon.co.jp (the Japanese site), for a converted $20 for 10 cups, plus shipping. One has to register in this site, since your credentials from the US website don't work.
Maybe we can do a group purchase with a single individual, and then distribute them. In the mean time, I'm trying to source them in Ecuador through Pancho.