Glad to be a part of the team!
Mark
ShowMePatrol






ShowMePatrol wrote:First of all, let me say that I was referred to this magnificent site by Wade (Grenadier). I can't thank him enough for exposing this awesome culmination of knowledge and resources. That being said, I will take deliver of a faded green 68 Patrol early next week....Yes, it is the one listed on CL in NE. I was going to pick it up in a few weeks but a last minute business trip is sending me to within a few hours of the Patrol, so I have decided to pick up the Patrol after visiting a customer. I'm glad to be a part of this community and I hope to learn as much as I can about the cool Patrol vintage. The Patrol has always been on my bucket list. For my entire life, I've always had a toy in the shop to tinker with. From the 59 MGA (Should have kept!), 69 Midget, 71 MGB, 72 Datsun Z, 84 Trooper (I should have kept).....to the cool Audi TT Convt 225 that I just brought back to life after buying it with the front completely crushed. I've always liked interesting cars that were not main stream.
Glad to be a part of the team!
Mark
ShowMePatrol



ShowMePatrol wrote:Thanks Bob!
Here is a list of what I plan on doing when I get it back to the shop. What do you guys think? I forget anything?
1. Check oil level in engine
2. Place Auto Trans/Kerosine mix, Marvelous Mystery Oil or whatever the best recommendation from the group is......in each cylinder and let it sit
overnight (or longer).
3. Check fluid levels in trans, diff, etc (Just to make sure but probably not so important for the moment of truth)
4. After #2 and with spark plugs out, turn crank by hand to ensure engine is not locked up.
5. Change oil
6. Clean carb
7. Change fuel filter(s)?
8. Connect fuel inlet line (from fuel tank) to portable solution (Plastic gas can, etc). Will check Patrol tank
condition later.
9. Change Spark plugs
10. Clean radiator with warm water and cleaning solution, refill with water (Antifreeze/water later)
11. Prelube engine (Considering this)
12. Place battery in Patrol
13. Remove valve cover and pour fresh oil over the entire valve train.
14. Cross fingers and turn the key