Heater Vent hoses & fresh air intake hose
Posted: Wed Oct 17, 2012 10:21 am
An open forum for all enthusiasts of the classic 60 series Nissan Datsun Patrol to gather and share information and gain knowledge. Members share off-road stories, restoration advice, modification ideas in an atmosphere free of a single controller. The fo
https://www.60patrol.com/forum/
bosque wrote:I will add a shot of the fresh air hose (3"-3 1/2" from Gates also) when I find it. This hose is not original but looks very good and close. The original vent hose was spring wrapped with canvas.
I will get one! I am in the process of putting it back together.RiverPatrol wrote:Do you have a picture of the finished product?
You could wrap the new gates brand with the shrink "mink coat"!Urban60 wrote:Here are some pictures not a perfect solution. If the coil is all beat up I would not recommend this because every imperfection shows when it shrinks into the voids. You can use the fabric heat shrink just to repair over your existing hose material but you will be trapping in years of dirt.
bosque wrote:You could wrap the new gates brand with the shrink "mink coat"!Urban60 wrote:Here are some pictures not a perfect solution. If the coil is all beat up I would not recommend this because every imperfection shows when it shrinks into the voids. You can use the fabric heat shrink just to repair over your existing hose material but you will be trapping in years of dirt.