Removing Transmission from engine
-
- Patrol Newbie

- Posts: 7
- Joined: Tue Nov 20, 2012 7:34 pm
- Location:
Removing Transmission from engine
I just pulled my engine out to be rebuilt. Now I am trying to get the transmission off of the engine. The bolts are removed from inside the bellhousing. I can not get a socket on the top nut. Is there a special tool for this? How do you get to the bottom bolts? Thank you, Willie
-
- Patrol Newbie

- Posts: 3
- Joined: Tue Nov 20, 2012 7:34 pm
- Location:
Removing Transmission from engine
; ; You need to separate the gearbox from the bellhousing, then remove the clutch assembly and flywheel. ; ; Only then can you access the bellhousing nuts.; ; Have a look at my thread at http://www.rmp-o.com/phpbb/viewtopic.ph ... c&start=70; ; Also good photos from Page 3 onwards; ; Steve; ; ; ;
-
- So, I just bought this Patrol….

- Posts: 41
- Joined: Tue Nov 20, 2012 7:34 pm
- Location:
Removing Transmission from engine
; First you have to take the trasmisin off of the bellhuosing ; ; ; From: nismopatrol@hotmail.comTo: NissanPatrolClubAlbuquerque@groups.msn.comSubject: Removing Transmission from engineDate: Mon, 16 Jun 2008 20:20:26 -0700; ; ; .ExternalClass EC_ThmFgColumnHeader, .ExternalClass A.EC_FrameLink, .ExternalClass A.EC_HeaderLink, .ExternalClass A.EC_FooterLink, .ExternalClass A.EC_LgtCmd, .ExternalClass A.EC_MSNLink; {color:#FFFFFF;}; .ExternalClass EC_ThmFgTitleLightBk; {color:#FF6600;}; .ExternalClass EC_ThmFgSmallLight; {color:#ff0000;}; .ExternalClass EC_ThmFgNavLink, .ExternalClass A.EC_NavLink, .ExternalClass A.EC_ChildLink:hover; {color:#666699;}; .ExternalClass EC_ThmFgInactiveText, .ExternalClass A.EC_SystemLink; {color:#666666;}; .ExternalClass EC_ThmFgFrameTitle; {color:#FFFFCC;}; .ExternalClass EC_ThmFgTitleDarkBk, .ExternalClass A.EC_NavLink:hover, .ExternalClass A.EC_TitleLink; {color:#CC6600;}; .ExternalClass EC_ThmFgMiscText, .ExternalClass A.EC_Cat, .ExternalClass A.EC_SubCat; {color:#336699;}; .ExternalClass EC_ThmFgCommand, .ExternalClass A.EC_Command, .ExternalClass A.EC_LargeCommand, .ExternalClass A.EC_MsgLink; {color:#003366;}; .ExternalClass EC_ThmFgHeader; {color:#333333;}; .ExternalClass EC_ThmFgStandard, .ExternalClass A.EC_SystemLink:hover, .ExternalClass A.EC_SubLink, .ExternalClass A.EC_ChildLink, .ExternalClass A.EC_StdLink, .ExternalClass SELECT.EC_Standard; {color:#000000;}; .ExternalClass EC_ThmFgDivider; {color:#CCCCCC;}; .ExternalClass EC_ThmBgStandard; {background-color:#FFFFFF;}; .ExternalClass EC_ThmBgUnknown1; {background-color:#FF6600;}; .ExternalClass EC_ThmBgFraming; {background-color:#666699;}; .ExternalClass EC_ThmBgUnknown2; {background-color:#666666;}; .ExternalClass EC_ThmBgHighlightDark; {background-color:#FFFFCC;}; .ExternalClass EC_ThmBgHighlightLight, .ExternalClass #EC_idToolbar, .ExternalClass #EC_tbContents; {background-color:#FFFFE8;}; .ExternalClass EC_ThmBgTitleDarkBk; {background-color:#F1F1F1;}; .ExternalClass EC_ThmBgAlternate; {background-color:#ECF1F6;}; .ExternalClass EC_ThmBgUnknown3; {background-color:#CCCCFF;}; .ExternalClass EC_ThmBgDivider; {background-color:#CCCCCC;}; .ExternalClass EC_ThmBgHeader; {background-color:#9999CC;}; .ExternalClass EC_ThmBgLinks; {background-color:#8696C9;}; .ExternalClass EC_ThmBgSharkBar; {background-color:#8696C9;}; .ExternalClass EC_ThmBgGlobalNick; {background-color:#9394A9;}; .ExternalClass EC_calfgndcolor; {color:#E00505;}; .ExternalClass EC_calbgndcolor; {color:#E00505;}; ; ; ; ; ; ; New Message on Nissan Patrol Club Albuquerque; ; ; Removing Transmission from engine; ; ; ; Reply; ; ; ; ; ; Reply to Sender Recommend ; Message 1 in Discussion ; ; ; ; ; ; From: Patrol11 ; ; ; I just pulled my engine out to be rebuilt. Now I am trying to get the transmission off of the engine. The bolts are removed from inside the bellhousing. I can not get a socket on the top nut. Is there a special tool for this? How do you get to the bottom bolts? ; ; ; Thank you,; WillieView other groups in this category. ; ; ; ; ; ; ; To stop getting this e-mail, or change how often it arrives, go to your E-mail Settings. Need help? If you've forgotten your password, please go to Passport Member Services. For other questions or feedback, go to our Contact Us page. If you do not want to receive future e-mail from this MSN group, or if you received this message by mistake, please click the "Remove" link below. On the pre-addressed e-mail message that opens, simply click "Send". Your e-mail address will be deleted from this group's mailing list. Remove my e-mail address from Nissan Patrol Club Albuquerque.