Page 1 of 1
filling transfer case
Posted: Tue Jul 17, 2007 7:19 pm
by npca-6x6
I've just finished replacing the rear seal on my 69's transfer case, but the hole that I expected to be the fill hole (9/16 plug a few inches above the drain hole) is blocked by the internal 2 wheel / 4 wheel shift rod. Can anyone tell me how to fill this thing? 6X6
filling transfer case
Posted: Tue Jul 17, 2007 9:41 pm
by npca-dinosaur 2
; On 67 Patrol on the floor board under the floor mat ; around the shifting levers.; ; ; Don
filling transfer case
Posted: Wed Jul 18, 2007 9:13 am
by npca-abuelo442
Filler hole is on the left side of the Transfer Case, with a square head. It shouldn't be blocked by anything. Filler hole for the transmission case is on top, and plug also is the dip stick for this case.
filling transfer case
Posted: Sat Jul 21, 2007 10:55 pm
by npca-6x6
Thanks, my '69 has the filler on the top left also. I appreciate the help.
filling transfer case
Posted: Sun Jul 22, 2007 6:57 pm
by npca-dinosaur 2
; Your Welcome, I have a 69 for parts ; also.; ; ; Don; ; ----- Original Message ----- ; From: ; 6x6 ; To: Nissan Patrol Club ; Albuquerque ; Sent: Saturday, July 21, 2007 9:55 ; PM; Subject: Re: filling transfer case; ; ; ; ; New Message on Nissan Patrol ; Club Albuquerque; ; ; filling ; transfer case; ; ; ; Reply; ; ; ; ; ; Reply to Sender Recommend ; Message 4 in ; Discussion ; ; ; ; ; ; From: 6x6 ; ; Thanks, my '69 has the filler on the ; top left also. I appreciate the ; help.View other groups in this ; category. ;