Re: Name that part!
Posted: Thu Apr 30, 2015 12:15 pm
Manifold to cylinder head yoke and intake manifold collar.
Let's try a harder one!
Cheers
60Patrol
An open forum for all enthusiasts of the classic 60 series Nissan Datsun Patrol to gather and share information and gain knowledge. Members share off-road stories, restoration advice, modification ideas in an atmosphere free of a single controller. The fo
https://www.60patrol.com/forum/
Name that part!
Page 37 of 41
Re: Name that part!
Posted: Thu Apr 30, 2015 12:52 pm
Not sure what you mean by "yoke", I just call them spacers but you got it! Two styles pictured. FYI, you can't get the collar anymore. I made some using stainless steel pipe and they fit perfectly.
Let's try a harder one!
Cheers
Let's try a harder one!
Cheers
Re: Name that part!
Posted: Sat May 02, 2015 12:32 pm
If it's a spacer inside a transfer or tranny, or from the Birfields, I've never had one apart to know. 
Re: Name that part!
Posted: Tue May 05, 2015 10:13 am
Pretty close, enough to give it to ya!RiverPatrol wrote:If it's a spacer inside a transfer or tranny, or from the Birfields, I've never had one apart to know.
Spacer for the rear output on the t-case.
Cheers
Re: Name that part!
Posted: Tue May 05, 2015 3:00 pm
That one's too easy - the answer is in the background of the photo... 
Those are the detent balls and springs for the 2wd/4wd and the hi/lo shifters
Those are the detent balls and springs for the 2wd/4wd and the hi/lo shifters
Re: Name that part!
Posted: Tue May 05, 2015 3:21 pm
I let you have that one. 
Re: Name that part!
Posted: Tue May 05, 2015 3:30 pm
Yeah, I should have let someone else swing at Ian's low speed softball pitch, as well...RiverPatrol wrote:I let you have that one.
I'm a post-whore...
Re: Name that part!
Posted: Tue May 05, 2015 3:42 pm
No RMP&O, RiverPatrol, or Esteban, or 50Car replies are allowed...
Re: Name that part!
Posted: Tue May 05, 2015 4:14 pm
Hey the one I last posted is easy! Hint right there in the picture.
Cheers
Cheers
Re: Name that part!
Posted: Tue May 05, 2015 8:53 pm
Looks like one of the parts to the drag link. I don't know its proper name but its in the stack up on the end where the ball type joint is.moore_rb wrote:
No RMP&O, RiverPatrol, or Esteban, or 50Car replies are allowed...