60Patrol

plateaucal wrote:Just for the record, the ones i had for the 67 did not fit the 69. Different bolt pattern.

Plateaucal is correct. I jus looked at Deuce, a 67 and Ducky, a 69. The sketch below describes the two different shapes of the frame members and slightly different dimensions of the mounting holes. These dimensions are nominal and taken with a tape measure in one hand, and flashlight in the other, so they are only for reference. Those of you waiting for your bumperettes, please let me know what type of frame member you have, or I can ship them to you with no holes drilled, your choice.

Thanks to Plateaucal for clarifying.

Rick

Also note that the ones with the cut out are for '69 and later.

rjiggy wrote:

plateaucal wrote:Just for the record, the ones i had for the 67 did not fit the 69. Different bolt pattern.

Plateaucal is correct. I jus looked at Deuce, a 67 and Ducky, a 69. The sketch below describes the two different shapes of the frame members and slightly different dimensions of the mounting holes. These dimensions are nominal and taken with a tape measure in one hand, and flashlight in the other, so they are only for reference.

20181022_191205.jpg

Those of you waiting for your bumperettes, please let me know what type of frame member you have, or I can ship them to you with no holes drilled, your choice.

Thanks to Plateaucal for clarifying.

Rick

Yes thank you for the clarification! Rick I sent you an email with measurements from my 69 which are pretty close to the ones shown. Let me know if you got it okay. Thank you,

Ernest

Just got the bumperettes today in the mail Rick! They look great and the bolt hole placements are just right. can't wait to mount them up , will post photos when i do. Thanks again! Huge help!

I'm off to the supply house this morning to get some more steel. Anyone else looking for a set of these, let me know.
It may be a while before I fire up the bumperette press again.

Thanks,
Rick

Quick photo of Rick's handiwork mounted up .... Primed and test fit. Looking great! Thanks RICK!

RJiggy... Considered by many to be the GOAT when it comes to Patrol bumperettes...

I own two pairs of his work myself, and my only regret was that I didn't have him autograph them before he shipped them out.

I’d like to get a set

I would like an early set as well with no cutout. My Patrol is a '67.

Three month review after installing these on my patrol.... Gas mileage has improved by 4 mpg, fender rust spots have vanished, and my brakes don't pull to the right anymore. Absolutely amazing!

But seriously, great work Rick, love mine