Page 2 of 58

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Fri Aug 02, 2013 6:11 pm
by mdawg4x4
Chucks67 wrote:awesome! bought the hose and new fan belt. Taking her out to a local car show on Sunday.
Awesome. Let us know how many times you hear nice Jeep/Land Cruiser/Land Rover, before they see the Nissan emblem!

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Fri Aug 02, 2013 9:52 pm
by Chucks67
Think i will put a jar inside for the nickels on how many times I hear it

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Fri Aug 02, 2013 11:50 pm
by moore_rb
Mine also did not have the spring, but I was able to find one recently for it - Esteban's diagram above was very helpful... :handgestures-thumbupleft:

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sat Aug 03, 2013 3:53 pm
by Chucks67
I used a flat washer for the cup plate and then the spring from my roadsters
glass bowl fuel filter. I'm amazed that nothing was in there because the oil
Can bypass the filter completely with out it. I'm pretty happy with how she runs
now. 90 psi oil pres. and 180/190 temp.

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sun Aug 04, 2013 8:30 pm
by Chucks67
I'm looking for one more wheel for a 67. Needs to be a 3 piece, I have 3 now

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sun Aug 04, 2013 9:57 pm
by RiverPatrol
If you have 3, then you need 2 more. Don't forget the spare. :D

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sun Aug 11, 2013 7:56 pm
by IrishPatrol
Ok heres one, Do the wheel studs just pop out like most cars, trucks, etc? And what size threads,Stud leagth, etc do I need to replace Stripped threads, Stud.

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sun Aug 11, 2013 9:35 pm
by IrishPatrol
And one more please, Do the Dust cap (covers) on the front hubs screw on and off or will they just pop off.

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sun Aug 11, 2013 11:02 pm
by RiverPatrol
Good questions!

The studs pop out like most other studs, from the back side of the hub. I don't have the dimensions off hand.

Id you have dust covers on the front hubs then you don't have the free-wheeling hubs. The dust caps do just pry off, they are not threaded.

Re: The Quick/Small/(Stupid?) Question Thread.

Posted: Sun Aug 11, 2013 11:16 pm
by IrishPatrol
Thanks River!