Page 2 of 2

Re: 1967 stock mirrors

Posted: Mon Jan 07, 2013 8:24 pm
by RiverPatrol
zed wrote:Here are two mirrors both from a 1967:
http://m.flickr.com/#/photos/53116286@N ... 536432149/
Left stock head, right aftermarket head (I believe).
Keith
Those mirrors would be from a '68 or later.

Re: 1967 stock mirrors

Posted: Fri Jan 11, 2013 8:37 pm
by bosque
These look stock. Belonged to npca-strauz
132

Re: 1967 stock mirrors

Posted: Thu Apr 18, 2013 8:50 am
by norville
Just another post up about side mirrors. I found these 1960-66 chevy truck mirrors look a lot like the fender mounted mirrors on patrols.. I'm not sue if the bends are correct but they look close..and they are all over the "bay" .... although I'm still going to go the jeep/fj40 route..

http://www.brotherstrucks.com/prodinfo. ... er=OMR6P00

Image

Image

Re: 1967 stock mirrors

Posted: Mon Apr 22, 2013 11:55 pm
by 69usa60
OK....I have two STOCK mirrors from my 69! One mounted with FACTORY bolts on drivers door(on rounded part of the body line) the other on the passenger side fender (again on the rounded body line)

Re: 1967 stock mirrors

Posted: Tue Apr 23, 2013 8:30 am
by RiverPatrol
69usa60 wrote:OK....I have two STOCK mirrors from my 69! One mounted with FACTORY bolts on drivers door(on rounded part of the body line) the other on the passenger side fender (again on the rounded body line)
That's great that you have both of them, usually one or both are missing. The mirrors changed in '68 and went to the door and fender mount rectangular mirror. They seemed to hold up better than the round one one the firewall.

Re: 1967 stock mirrors

Posted: Thu May 02, 2013 5:41 am
by G60michael
I need an original firewall moutn mirror,i think my one may have been knocked off by the door as there is a slight dent in the door at the height of where the mirror head would be

Re: 1967 stock mirrors

Posted: Fri May 03, 2013 4:37 pm
by G60michael
had a crack a few weeks back at trying to make a Replica Firewall mount mirror, I don't thinks it to bad of a product I made, but I need a better Mirror head, and an actual mirror to replicate Off

12021203

Re: 1967 stock mirrors

Posted: Fri May 03, 2013 5:28 pm
by RiverPatrol
Not bad. :handgestures-thumbup: That's the best attempt I've seen yet.

Re: 1967 stock mirrors

Posted: Sun Feb 09, 2014 7:49 pm
by Keith
norville wrote:Just another post up about side mirrors. I found these 1960-66 chevy truck mirrors look a lot like the fender mounted mirrors on patrols.. I'm not sue if the bends are correct but they look close..and they are all over the "bay" .... although I'm still going to go the jeep/fj40 route..

http://www.brotherstrucks.com/prodinfo. ... er=OMR6P00
Chevy mounts are different. they are flat & bigger. Here is pics of 69 Patrol mount door vs Chevy bolt pattern. & a 69 rectancal head. also an aftermarket on my 69.

Re: 1967 stock mirrors

Posted: Wed May 21, 2014 8:37 pm
by Wonderbread
67 mirror