Bell Housing

Won't run? Engine, cooling system, fuel pump, carb, clutch, tranny, brakes, etc. The old messages from the NPCA 'Engine & Mechanical' category are here.
Locked
npca-arion
Lurker
Lurker
Posts: 2
Joined: Tue Nov 20, 2012 7:34 pm
Location:

Bell Housing

Post by npca-arion »

I have the motor pulled out of my Patrol, but the Bell housing is still attached, does anyone know how to get it off?! It seems like the Flywheel is in the way of the 4 bolts to get it off. Has anybody done this before, any help would be great!
Top
npca-riverpatrol
You know you own a Patrol when…
You know you own a Patrol when…
Posts: 213
Joined: Tue Nov 20, 2012 7:34 pm
Location:
Been thanked: 1 time

Bell Housing

Post by npca-riverpatrol »

As I recall, you have to take the flywheel off first.
Top
Locked

Return to “Engine and Mechanical”