Need shock size for my lifted Patrol!

Bottoms out? Shimmies? Shackles, springs, shocks, steering linkage etc. The old messages from the NPCA 'Suspension' category are here.
Post Reply
So, I just bought this Patrol….
So, I just bought this Patrol….
Posts: 52
Joined: Mon Oct 02, 2023 12:38 pm
Location: Corpus Christi, Texas
Location: Corpus Christi, Texas
Has thanked: 16 times
Been thanked: 31 times

Need shock size for my lifted Patrol!

Post by Frio Patrol »

Good afternoon Patrolers! Need shock help please.... My '68 came with extended shackles (7" from eye to eye) and I was wondering how much lift that created. I don't know the original shackle size (eye to eye) so I'm not sure how much longer of a shock I will need from the original shock. I don't trust the current shock size because of the half arse work that I have discovered from the previous owner. Any idea or suggestions would be much appreciated!!!
You do not have the required permissions to view the files attached to this post.
So, I just bought this Patrol….
So, I just bought this Patrol….
Posts: 52
Joined: Mon Oct 02, 2023 12:38 pm
Location: Corpus Christi, Texas
Location: Corpus Christi, Texas
Has thanked: 16 times
Been thanked: 31 times

Re: Need shock size for my lifted Patrol!

Post by Frio Patrol »

Let's try this another way. Can someone please send me the measurement (from the center of the bolts) of their original shackles? Mine are about 9" end to end and about 7" from center of bolt to center of bolt.
User avatar
Patrol Fanatic!
Patrol Fanatic!
Posts: 2932
Joined: Sat Feb 23, 2013 11:28 am
Location: Lutherville, MD
Location: Lutherville, MD
Has thanked: 5771 times
Been thanked: 1524 times

Re: Need shock size for my lifted Patrol!

Post by Esteban »

Frio Patrol wrote: Mon Apr 14, 2025 8:15 am Let's try this another way. Can someone please send me the measurement (from the center of the bolts) of their original shackles? Mine are about 9" end to end and about 7" from center of bolt to center of bolt.

I just measured mine. Center to center is 2-1/2" (actually 65 mm) A big difference with yours at 7".
By looking at a diagram of the rear suspension, that additional length of the shackle will add approximately 2-1/4" at the axle.

I saved this information in my notes from the Compatible Parts List [http://parts.60patrol.com] that members over the years have submitted, and then prepared the following table:

The following table is for the Original Shocks. Front and Rear are the same:
BrandPart #ExtendedCompressedTravelApplication
Monroe Sensa-Track582616.37510.1256.251957-60 Ford F-100
Monroe Monro-Matic 3106917.2510.756.5Ford Mustang Rear
Gabriel Guardian8127017.6710.567.111960 F-100, front
KYB Excel-G34321917.410.317.091965-73 Ford Mustang Rear
KYB Gas-A-Just17.8717.8710.96.971965-73 Ford Mustang Rear
This next table, is also taken from what some members have installed with a 2" lift:
BrandPart #ExtendedCompressedTravelApplication
Gabriel Classic8212520.6712.068.611972-82 Ford Courier, Rear
Monroe Matic 3112520.7512.258.51972-82 Ford Courier, Rear
Monroe Max-AirMA73920.87512.3758.51972-82 Ford Courier, Rear
KYB Excel-G34405219.3711.38.071972-82 Ford Courier, Rear

Hope you can use this info as a guide for your case.
Owner of the same Patrol since 1967
So, I just bought this Patrol….
So, I just bought this Patrol….
Posts: 52
Joined: Mon Oct 02, 2023 12:38 pm
Location: Corpus Christi, Texas
Location: Corpus Christi, Texas
Has thanked: 16 times
Been thanked: 31 times

Re: Need shock size for my lifted Patrol!

Post by Frio Patrol »

Looks like I'll need the KYB Excel-G are the ones I will need! Thank you Esteban..... I greatly appreciate your help!
Post Reply