filling transfer case

npca-6x6 · Post by **npca-6x6** » Tue Jul 17, 2007 7:19 pm

I've just finished replacing the rear seal on my 69's transfer case, but the hole that I expected to be the fill hole (9/16 plug a few inches above the drain hole) is blocked by the internal 2 wheel / 4 wheel shift rod. Can anyone tell me how to fill this thing? 6X6

npca-dinosaur 2 · Post by **npca-dinosaur 2** » Tue Jul 17, 2007 9:41 pm

; On 67 Patrol on the floor board under the floor mat ; around the shifting levers.; ; ; Don

npca-abuelo442 · Post by **npca-abuelo442** » Wed Jul 18, 2007 9:13 am

Filler hole is on the left side of the Transfer Case, with a square head. It shouldn't be blocked by anything. Filler hole for the transmission case is on top, and plug also is the dip stick for this case.

npca-6x6 · Post by **npca-6x6** » Sat Jul 21, 2007 10:55 pm

Thanks, my '69 has the filler on the top left also. I appreciate the help.

npca-dinosaur 2 · Post by **npca-dinosaur 2** » Sun Jul 22, 2007 6:57 pm

; Your Welcome, I have a 69 for parts ; also.; ; ; Don; ; ----- Original Message ----- ; From: ; 6x6 ; To: Nissan Patrol Club ; Albuquerque ; Sent: Saturday, July 21, 2007 9:55 ; PM; Subject: Re: filling transfer case; ; ; ; ; New Message on Nissan Patrol ; Club Albuquerque; ; ; filling ; transfer case; ; ; ; Reply; ; ; ; ; ; Reply to Sender Recommend ; Message 4 in ; Discussion ; ; ; ; ; ; From: 6x6 ; ; Thanks, my '69 has the filler on the ; top left also. I appreciate the ; help.View other groups in this ; category. ;