Timing Gears and associated parts.
-
- Patrol Newbie

- Posts: 7
- Joined: Tue Mar 17, 2020 4:18 pm
- Location: Alberta
- Has thanked: 3 times
- Been thanked: 4 times
- Contact:
Timing Gears and associated parts.
I have searched and there are discussions here about the differences between the P and the P40 timing parts but I haven't actually found any info on timing set parts for the P.
I am on the verge of an engine rebuild but if I can't get timing gears and associated parts it seems like a rebuilt isn't possible.
Any advice?
I am on the verge of an engine rebuild but if I can't get timing gears and associated parts it seems like a rebuilt isn't possible.
Any advice?
- You know you own a Patrol when…

- Posts: 489
- Joined: Wed Dec 12, 2012 8:29 pm
- Location: Pasco, Washington
- Has thanked: 529 times
- Been thanked: 301 times
- Contact:
Re: Timing Gears and associated parts.
The P motor is gear to gear so normally, no replacement is required. If the aluminum gear attached to can shaft is damaged, there are members on this site who have spare parts.
Jeff
50Car
50Car
-
- Patrol Newbie

- Posts: 7
- Joined: Tue Mar 17, 2020 4:18 pm
- Location: Alberta
- Has thanked: 3 times
- Been thanked: 4 times
- Contact:
Re: Timing Gears and associated parts.
So, it is used parts (which is fine of they are good) or nothing. Correct?50car wrote:The P motor is gear to gear so normally, no replacement is required. If the aluminum gear attached to can shaft is damaged, there are members on this site who have spare parts.
- Patrol Fanatic!

- Posts: 3000
- Joined: Sat Feb 23, 2013 11:28 am
- Location: Lutherville, MD
- Location: Lutherville, MD
- Has thanked: 6010 times
- Been thanked: 1600 times
Re: Timing Gears and associated parts.
Correct.
The gears will probably be fine. I’ve had Patrols with over 100k at a rebuild, and the gears were fine. My current engine, has two rebuilds done and the gears were not changed.
When the tim comes, please post some pictures of them.
The gears will probably be fine. I’ve had Patrols with over 100k at a rebuild, and the gears were fine. My current engine, has two rebuilds done and the gears were not changed.
When the tim comes, please post some pictures of them.
Owner of the same Patrol since 1967
- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Timing Gears and associated parts.
You can sometimes find the gears on Amayama but they are PRICEY!!
http://www.amayama.com/
http://www.amayama.com/
Justin
-
- I love driving my Patrol!

- Posts: 985
- Joined: Sat Aug 02, 2014 8:59 am
- Location: Colorado
- Has thanked: 264 times
- Been thanked: 776 times
Re: Timing Gears and associated parts.
But, engines rotate differently South of the equator...right. So would the parts work, but only in reverse?
-
- Patrol Newbie

- Posts: 7
- Joined: Tue Mar 17, 2020 4:18 pm
- Location: Alberta
- Has thanked: 3 times
- Been thanked: 4 times
- Contact:
Re: Timing Gears and associated parts.
How? Their drop down list for years doesn’t go old enough. Hmmm?jwgreen wrote:You can sometimes find the gears on Amayama but they are PRICEY!!
http://www.amayama.com/
- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Timing Gears and associated parts.
Just use the part number in the search box. You can find that in the parts manual that you can download from the forum.
Justin