Temp Sending unit/ Temperature Sensor
-
- So, I just bought this Patrol….

- Posts: 57
- Joined: Sun Mar 01, 2020 5:01 pm
- Location: Boise, Idaho, USA
- Has thanked: 28 times
- Been thanked: 31 times
Temp Sending unit/ Temperature Sensor
So I tested my temp sending unit and it appears to be faulty. When I checked the resistence at various temps ranging from room temp to boiling, I failed to get any ohlms.... Anyway, does anyone have any suggestions on where to obtain one. My Patrol is a 66. Thanks again! Mark
- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
You can use one of these to replace it with a bit of modification. This sensor fits in perfectly but doesn't have a "nut" to lock it into place. I took my old sensor, cut the end off, drilled out the center and it slides perfectly over the new one.
https://www.ebay.com/itm/SANKEI-OEM-MAD ... 1080789526
PM me if you need more details on how to do that.
https://www.ebay.com/itm/SANKEI-OEM-MAD ... 1080789526
PM me if you need more details on how to do that.
You do not have the required permissions to view the files attached to this post.
Justin
-
- So, I just bought this Patrol….

- Posts: 57
- Joined: Sun Mar 01, 2020 5:01 pm
- Location: Boise, Idaho, USA
- Has thanked: 28 times
- Been thanked: 31 times
Re: Temp Sending unit/ Temperature Sensor
Cool. this looks like it will work. However, last night, I found a forklift parts supplier who claims to have the stock sensors in stock. I ordered one. We will see if it indeed is the right one...jwgreen wrote:You can use one of these to replace it with a bit of modification. This sensor fits in perfectly but doesn't have a "nut" to lock it into place. I took my old sensor, cut the end off, drilled out the center and it slides perfectly over the new one.
https://www.ebay.com/itm/SANKEI-OEM-MAD ... 1080789526
PM me if you need more details on how to do that.
- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
Awesome!! Let me know if it is the correct one. I'll get one as a backup.poinrobe wrote:Cool. this looks like it will work. However, last night, I found a forklift parts supplier who claims to have the stock sensors in stock. I ordered one. We will see if it indeed is the right one...jwgreen wrote:You can use one of these to replace it with a bit of modification. This sensor fits in perfectly but doesn't have a "nut" to lock it into place. I took my old sensor, cut the end off, drilled out the center and it slides perfectly over the new one.
https://www.ebay.com/itm/SANKEI-OEM-MAD ... 1080789526
PM me if you need more details on how to do that.
Justin
- Administrator

- Posts: 7817
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7696 times
- Been thanked: 2477 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
That sleeve nut is intended to be removable. They just usually get stuck on with corrosion. So the one you got looks exactly like stock.jwgreen wrote:You can use one of these to replace it with a bit of modification. This sensor fits in perfectly but doesn't have a "nut" to lock it into place. I took my old sensor, cut the end off, drilled out the center and it slides perfectly over the new one.
https://www.ebay.com/itm/SANKEI-OEM-MAD ... 1080789526
PM me if you need more details on how to do that.
Beyond any hope for intervention

- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
WOW!!! I would have never gotten the sleeve off without drilling it out!! But good to know that I didn't throw away that piece!!RiverPatrol wrote:That sleeve nut is intended to be removable. They just usually get stuck on with corrosion. So the one you got looks exactly like stock.jwgreen wrote:You can use one of these to replace it with a bit of modification. This sensor fits in perfectly but doesn't have a "nut" to lock it into place. I took my old sensor, cut the end off, drilled out the center and it slides perfectly over the new one.
https://www.ebay.com/itm/SANKEI-OEM-MAD ... 1080789526
PM me if you need more details on how to do that.
Justin
- I love driving my Patrol!

- Posts: 1104
- Joined: Wed Dec 05, 2012 12:05 pm
- Location: Plano, TX
- Location: Plano, TX
- Has thanked: 202 times
- Been thanked: 678 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
1969 Patrol L60
1965 Patrol L60 (parts provider)
1966 PL520
1970 240Z
1990 300ZX (sold 10/04/13)
1965 Patrol L60 (parts provider)
1966 PL520
1970 240Z
1990 300ZX (sold 10/04/13)
- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
Why you been holding out on us Keith?!!!!!?zed wrote:A primer on thermal transmitters
http://datsun1200.com/modules/mediawiki ... ntable=yes
Keith
Justin
- I love driving my Patrol!

- Posts: 1104
- Joined: Wed Dec 05, 2012 12:05 pm
- Location: Plano, TX
- Location: Plano, TX
- Has thanked: 202 times
- Been thanked: 678 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
Tax season has stretched out....all consuming....must resist....
Keith
Keith
1969 Patrol L60
1965 Patrol L60 (parts provider)
1966 PL520
1970 240Z
1990 300ZX (sold 10/04/13)
1965 Patrol L60 (parts provider)
1966 PL520
1970 240Z
1990 300ZX (sold 10/04/13)
- I love driving my Patrol!

- Posts: 931
- Joined: Thu Oct 24, 2013 11:23 am
- Location: Iola, Tx
- Location: Iola, Tx
- Has thanked: 97 times
- Been thanked: 568 times
- Contact:
Re: Temp Sending unit/ Temperature Sensor
zed wrote:Tax season has stretched out....all consuming....must resist....
Keith
Justin