I've had no response on a post looking for some miscellaneous steering linkage parts so thought I'd try and keep it simply by trying to locate a COMPLETE steering linkage assembly (excluding the tie rod parts) for a G60. If anyone has an extra front end laying around, I'd be happy to take the entire assembly as shown in the attached diagram. The killer is we started this project with TWO complete front ends and somehow a few of these bits got lost.
Thanks all!
Steering Linkage for 67 G60
- So, I just bought this Patrol….

- Posts: 46
- Joined: Thu May 22, 2014 8:45 pm
- Location: Boulder, CO
- Has thanked: 11 times
- Been thanked: 22 times
Steering Linkage for 67 G60
You do not have the required permissions to view the files attached to this post.
'64 drivetrain/'67 chassis project on-going
- So, I just bought this Patrol….

- Posts: 46
- Joined: Thu May 22, 2014 8:45 pm
- Location: Boulder, CO
- Has thanked: 11 times
- Been thanked: 22 times
Re: Steering Linkage for 67 G60
I just spoke to Coby who is doing this work and what we really need is a complete drag link assembly with ends and inserts (parts 1, 4, 5, 6, 7, 10). In a perfect world the grease nipples (part 8) would be there along with shock attachment (parts 2 & 3). It would be a major bonus if the shock and bushings were also there (parts 15 and 19). Please let me know if you have one or know where one might be found. Thank you!
'64 drivetrain/'67 chassis project on-going
-
- So, I just bought this Patrol….

- Posts: 80
- Joined: Wed Dec 05, 2012 3:54 pm
- Location:
- Has thanked: 23 times
- Been thanked: 57 times
Re: Steering Linkage for 67 G60
I've got one. I'll send you a PM.
Located in central Missouri
1966 Hardtop
1964 very modified Hardtop
1967 Parts
1968 Parts
1962 Softy - SOLD
1966 Hardtop
1964 very modified Hardtop
1967 Parts
1968 Parts
1962 Softy - SOLD
- So, I just bought this Patrol….

- Posts: 46
- Joined: Thu May 22, 2014 8:45 pm
- Location: Boulder, CO
- Has thanked: 11 times
- Been thanked: 22 times
Re: Steering Linkage for 67 G60
Thanks CBlake for saving the day!
'64 drivetrain/'67 chassis project on-going