Patrol side emblem clips

yitzac1990 · Post by **yitzac1990** » Tue Jul 23, 2019 7:12 am

Hello, does anyone have a lead on new "clips" for holding the side emblem to the fender? Mine disappeared somehow and auto parts stores dont seem to carry them. They are the kind that look like a "coned" washer, and fit over the metal studs with tension to hold it on.

Esteban · Post by **Esteban** » Tue Jul 23, 2019 8:38 am

I've used "speed nuts" in the past. You can source them at the specialty hardware drawers at the hardware stores.

Some options here:

https://www.homedepot.com/s/speed%2520nut?NCNI-5

curlrider11 · Post by **curlrider11** » Tue Jul 23, 2019 8:52 am

Another name for them might be "push on nuts" or "push washers". Sure the hardware store has them.

zed · Post by **zed** » Tue Jul 23, 2019 10:54 am

Barrel clips:
https://www.ebay.com/i/323265165269?chn ... gIBi_D_BwE

Oftentimes, the clips scratch the paint as they are installed, leading to potential rusting of the metal. Consider using 3M double sided body tape to attach the emblems.
Keith

yitzac1990 · Post by **yitzac1990** » Tue Jul 23, 2019 11:41 am

thanks everyone! I actually have a bunch of speed nuts, I didnt even think of that.

For those barrel clips, I guess I would have to drill the holes in the fender slightly bigger, correct? Im not worried about the paint being scratched, my patrol is full of rust

60Patrol

Patrol side emblem clips

Patrol side emblem clips

Re: Patrol side emblem clips

Re: Patrol side emblem clips

Re: Patrol side emblem clips

Re: Patrol side emblem clips