Bulb socket insulator

[zed]

Does anyone have a source for replacement bulb socket insulators

https://www.flickr.com/photos/53116286@ ... en-public/

Note, this socket is from a 1969 Patrol turn signal, which has the mounting tab offset from the terminals. (Compared to the 240Z which has the tab inline with the terminals.)

Thanks,
Keith

[Flaggoni]

Could be my phone or something else, but I can't get the link to work.
Mild Bill

[RiverPatrol]

Try the link now.

[jwgreen]

http://www.oreillyauto.com/site/c/detai ... &ppt=C0243

Try this one maybe Keith

[zed]

Justin,

The socket from a 1969 Patrol turn signal, which has the mounting tab offset from the terminals. Compared to the Dorman which has the tab inline with the terminals.

Keith

[Flaggoni]

I scrounged my garage and only found the wrong type. You could buy the Dorman part and drill two more holes, or if you wish, I have four square feet of Micarta insulating board. I could send you a piece to make new parts from.
Mild Bill

[zed]

Bill,
Perhaps if I fill the two holes on the Dorman (with 2 part epoxy) and drill new holes I will be successful.

I appreciate your offer of the Micarta insulating board. If this board is as dense as my insulator I would need to find a way to cut the circumference cleanly. Let me ponder my options.

This forum is really a braintrust of information.
Keith

[jwgreen]

This one?

http://www.wiringdepot.com/store/p/447- ... 2-Pcs.aspx

[zed]

Justin,
Nice find.
Keith