U-cup cylinder seal alternative?

[ctcruiser]

p/n 44112-E5010

Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.

[RiverPatrol]

I think the seal is different for the rear cylinders? Most of us quit looking for those parts since the cylinders are readily available and inexpensive on eBay: http://www.ebay.com/itm/331677862533?_t ... EBIDX%3AIT

[jwgreen]

p/n 44112-E5010

Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to http://www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.

I think I have a few of these in my stash. I won't be home for a week or so but when I get back I can check and see if you can wait that long.

[ctcruiser]

p/n 44112-E5010

Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to http://www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.

I think I have a few of these in my stash. I won't be home for a week or so but when I get back I can check and see if you can wait that long.

I can wait, thank you very much that would be awesome...

[jwgreen]

Ok I located the ones in my stash. I do have the 6 you need plus 2 extras. I would like to have a full set as backup so lets do this. The part number on my packaging is 44112-E5001 purchased directly from Nissan Dealership. If you would try and see if they are still available then great, you can just order those. If not then let me know and I will send these out to you. How does that sound?

[ctcruiser]

Justin, can you verify the part number with a picture? , the part number that is listed is different than the one you mentioned.

[jwgreen]

Justin, can you verify the part number with a picture? , the part number that is listed is different than the one you mentioned.

But of course I can.

image.jpg

[jwgreen]

I just checked really quick and found some for sale on Amayama. They are not original Nissan but should work. https://www.amayama.com/en/search?regio ... 4112-e5001

[jwgreen]

Took some measurements from the ones I bought.

IMG_2506.JPG

IMG_2507.JPG

IMG_2508.JPG

IMG_2509.JPG

[Esteban]

I was looking yesterday at a set of wheel cylinder seals that I have (they were misplaced and found them yesterday ) They're in a box from the manufacturer, SEIKEN with the following reference:

4518R - 1"

Please note that Seiken is the original manufacturer for the brake seals in the Patrol.

Wheel Cylinder Seal Cups.jpg

If you do a search with the reference above, they are available at Amazon.co.jp (the Japanese site), for a converted $20 for 10 cups, plus shipping. One has to register in this site, since your credentials from the US website don't work.

Maybe we can do a group purchase with a single individual, and then distribute them. In the mean time, I'm trying to source them in Ecuador through Pancho.