Someday we'll top that gravel with concrete!
1967 Family Patrol Project
- Administrator

- Posts: 1225
- Joined: Sun Jul 28, 2013 12:45 am
- Location: Roseville, California
- Has thanked: 646 times
- Been thanked: 1149 times
- Contact:
1967 Family Patrol Project
We kicked off our family patrol project this weekend. Obviously we need a place to do the work... so we started adding in a driveway from the alley. I've learned two things: 1) Shoveling gravel is hard work; and 2) it's easy to get a 2wd Frontier stuck in fresh, deep gravel!
Someday we'll top that gravel with concrete!





Someday we'll top that gravel with concrete!
- Administrator

- Posts: 7814
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7688 times
- Been thanked: 2476 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
LOL!
Once it's been compacted the Frontier should be able to manage it okay. 
Beyond any hope for intervention

- Administrator

- Posts: 1225
- Joined: Sun Jul 28, 2013 12:45 am
- Location: Roseville, California
- Has thanked: 646 times
- Been thanked: 1149 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
The driveway is as done as it's going to get. A couple hours exploiting Family Patrol's source of child labor and the new gravel driveway has been compacted. The two new-to-us Patrols will arrive sometime late this week. Perhaps we need to name them: FP1 (our first -- while soft-top), FP2 (orange hard top) and FP3 (green hard top parts patrol)?
Joe working hard to keep the compactor from running away.
[iamge]1673[/image]
It may be four or five times his body mass, but Jay's sure to prevail!

Joe working hard to keep the compactor from running away.
[iamge]1673[/image]
It may be four or five times his body mass, but Jay's sure to prevail!
-
- Helping others revive their Patrol…

- Posts: 1619
- Joined: Thu Oct 04, 2012 8:35 am
- Location: USA
- Has thanked: 310 times
- Been thanked: 176 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
Joe has his steeltoe flip-flops on....safety first!
Man, your son Jay has quite a stache growing!!! Can you say Salvatore Dali?
Way to go team FP.
Patrol On!
Man, your son Jay has quite a stache growing!!! Can you say Salvatore Dali?
Way to go team FP.
Patrol On!
- Administrator

- Posts: 7814
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7688 times
- Been thanked: 2476 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
Kids working after dark - gotta be some child labor law violations there.
Great way to exploit the energy those kids have! 
Beyond any hope for intervention

- Administrator

- Posts: 1225
- Joined: Sun Jul 28, 2013 12:45 am
- Location: Roseville, California
- Has thanked: 646 times
- Been thanked: 1149 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
They're here! They're here! The two new (to us) patrols were delivered this morning. Took a bit of a shoehorn to get the tow truck into and out of the driveway, but the driver was a good sport (and earned a tip too!) and we worked them in while the kids are at school. They will be pretty excited when they get home.
Arrival

Making the turn from the narrow alley

#2 -- Delivered!

#3 -- Delivered!

I needed to replace that fence support anyway...

One was not enough and four is too many -- Here sit three patrols waiting for some love and attention!

Arrival
Making the turn from the narrow alley
#2 -- Delivered!
#3 -- Delivered!
I needed to replace that fence support anyway...
One was not enough and four is too many -- Here sit three patrols waiting for some love and attention!
-
- Helping others revive their Patrol…

- Posts: 1619
- Joined: Thu Oct 04, 2012 8:35 am
- Location: USA
- Has thanked: 310 times
- Been thanked: 176 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
I bet your kids will race home!
The front bumper on Orangie is perfect!!! Also, I notice a PO swapped out the side windows with a fixed piece of glass.....CBlake did this option too which seemed a good slamdunk. Side rubber for the sliding originals is available with a group buy of 10 sets or more.
Good job on it all....bummer they dont have drive shafts between all of them.
The front bumper on Orangie is perfect!!! Also, I notice a PO swapped out the side windows with a fixed piece of glass.....CBlake did this option too which seemed a good slamdunk. Side rubber for the sliding originals is available with a group buy of 10 sets or more.
Good job on it all....bummer they dont have drive shafts between all of them.
- Administrator

- Posts: 1225
- Joined: Sun Jul 28, 2013 12:45 am
- Location: Roseville, California
- Has thanked: 646 times
- Been thanked: 1149 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
Yea... Between all three, I have one front drive line. Maybe I'll get lucky and someone will want to ditch a few!
- Administrator

- Posts: 7814
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7688 times
- Been thanked: 2476 times
- Contact:
Re: 1967 Family Patrol Project -- Phase 1. A place to work.
Beyond any hope for intervention

- Administrator

- Posts: 1225
- Joined: Sun Jul 28, 2013 12:45 am
- Location: Roseville, California
- Has thanked: 646 times
- Been thanked: 1149 times
- Contact:
Re: 1967 Family Patrol Project
Some work actually started! Okay, so it was just replacing a flat tire, but something changed! Joe starting to learn how to work on cars!


