Dash knob question on Patrol
-
- So, I just bought this Patrol….

- Posts: 93
- Joined: Wed Dec 12, 2012 2:33 pm
- Location: Southern California
- Has thanked: 1 time
- Been thanked: 10 times
- Contact:
Dash knob question on Patrol
Hi, on my patrol there is a push button switch immediately above the ignition switch. I recall the previous owner used this push button to start up the engine. I doubt this is original - can someone post a picture of the factory dash - or let me know what that knob location should be for?
- Administrator

- Posts: 7829
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7740 times
- Been thanked: 2482 times
- Contact:
Re: Dash knob question on Patrol
The push button above the ignition switch is original on Patrols up to '67. Starting in '68 they used a 3-way ignition switch and placed a windshield washer switch, then a wiper switch where the push button used to be. The original ignition switch is simply a 2-way/on-off switch; the push button would engage the starter to turn the engine over. 
Beyond any hope for intervention

- Patrol Fanatic!

- Posts: 3010
- Joined: Sat Feb 23, 2013 11:28 am
- Location: Lutherville, MD
- Location: Lutherville, MD
- Has thanked: 6027 times
- Been thanked: 1607 times
Re: Dash knob question on Patrol
Check this post from RiverPatrol. She has one picture there that clearly shows the push button.GARYSCC wrote:Hi, on my patrol there is a push button switch immediately above the ignition switch. I recall the previous owner used this push button to start up the engine. I doubt this is original - can someone post a picture of the factory dash - or let me know what that knob location should be for?
http://www.60patrol.com/forum/viewtopic.php?f=2&t=1901
http://www.60patrol.com/forum/gallery/i ... age_id=955
Owner of the same Patrol since 1967