Back on Patrol

New members, tell us about yourself and your Patrol. Don't be shy!
Patrol Newbie
Patrol Newbie
Posts: 10
Joined: Sat Apr 25, 2026 5:13 pm
Location: Kansas
Been thanked: 16 times

Re: Back on Patrol

Post by KansasPatrol »

L60Boerne, Not sure if it will help but here's a picture of the carb I received and installed. My experience with Amazon is they will take just about anything back and its easy at least here in Wichita. Drop it off at KOHLS and you don't even have to pack it.

The 67 patrol has been way more cooperative on getting it running. Put a starter on it and it runs like a champ except for the water pump leak that I suspect is the backing plate like the 69. Brakes aren't great but both driver sides lock up. I like the cable clutch way more than hydraulic!!
You do not have the required permissions to view the files attached to this post.
Patrol Newbie
Patrol Newbie
Posts: 10
Joined: Sat Apr 25, 2026 5:13 pm
Location: Kansas
Been thanked: 16 times

Re: Back on Patrol

Post by KansasPatrol »

I have been trying to verify the fuel pump arm geometry of the 170101-50k00 to the patrol original. Best I can come up with is this overlay of photos found on the internet. I noticed that it looks like 17010-50K00 has cast in provisions for the fuel pump primer maybe.
You do not have the required permissions to view the files attached to this post.
Post Reply