U-cup cylinder seal alternative?

Original and compatible parts

Postby ctcruiser » Thu Jul 14, 2016 10:31 am

p/n 44112-E5010

Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.
ctcruiser Offline


So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 48
Images: 16
Joined: Sat Aug 02, 2014 6:42 pm
Has thanked: 17 times
Been thanked: 14 times
Location: connecticut

Postby RiverPatrol » Thu Jul 14, 2016 11:50 am

I think the seal is different for the rear cylinders? Most of us quit looking for those parts since the cylinders are readily available and inexpensive on eBay: http://www.ebay.com/itm/331677862533?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5847
Images: 762
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3908 times
Been thanked: 1217 times
Location: Temecula, CA

Postby jwgreen » Thu Jul 14, 2016 2:07 pm

ctcruiser wrote:p/n 44112-E5010

Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to http://www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.


I think I have a few of these in my stash. I won't be home for a week or so but when I get back I can check and see if you can wait that long.
Justin
jwgreen Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 650
Images: 70
Joined: Thu Oct 24, 2013 11:23 am
Location: Iola, Tx
Has thanked: 43 times
Been thanked: 259 times
Location: Iola, Tx

Postby ctcruiser » Thu Jul 14, 2016 9:51 pm

jwgreen wrote:
ctcruiser wrote:p/n 44112-E5010

Is there an alternative part for this? These are discontinued and i have tried numerous times reaching out to http://www.nissanparts.cc with no success. If i can get 6 of these i can rebuild my cylinders since they are not pitted.


I think I have a few of these in my stash. I won't be home for a week or so but when I get back I can check and see if you can wait that long.


I can wait, thank you very much that would be awesome...
ctcruiser Offline


So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 48
Images: 16
Joined: Sat Aug 02, 2014 6:42 pm
Has thanked: 17 times
Been thanked: 14 times
Location: connecticut

Postby jwgreen » Wed Jul 20, 2016 10:57 am

Ok I located the ones in my stash. I do have the 6 you need plus 2 extras. I would like to have a full set as backup so lets do this. The part number on my packaging is 44112-E5001 purchased directly from Nissan Dealership. If you would try and see if they are still available then great, you can just order those. If not then let me know and I will send these out to you. How does that sound?
Justin
jwgreen Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 650
Images: 70
Joined: Thu Oct 24, 2013 11:23 am
Location: Iola, Tx
Has thanked: 43 times
Been thanked: 259 times
Location: Iola, Tx

Postby ctcruiser » Wed Jul 20, 2016 11:51 am

Justin, can you verify the part number with a picture? , the part number that is listed is different than the one you mentioned.
ctcruiser Offline


So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 48
Images: 16
Joined: Sat Aug 02, 2014 6:42 pm
Has thanked: 17 times
Been thanked: 14 times
Location: connecticut

Postby jwgreen » Wed Jul 20, 2016 4:24 pm

ctcruiser wrote:Justin, can you verify the part number with a picture? , the part number that is listed is different than the one you mentioned.


But of course I can.

image.jpg
You do not have the required permissions to view the files attached to this post.
Justin
jwgreen Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 650
Images: 70
Joined: Thu Oct 24, 2013 11:23 am
Location: Iola, Tx
Has thanked: 43 times
Been thanked: 259 times
Location: Iola, Tx

Postby jwgreen » Fri Jul 22, 2016 8:29 am

I just checked really quick and found some for sale on Amayama. They are not original Nissan but should work. https://www.amayama.com/en/search?region=315&q=44112-e5001
Justin
jwgreen Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 650
Images: 70
Joined: Thu Oct 24, 2013 11:23 am
Location: Iola, Tx
Has thanked: 43 times
Been thanked: 259 times
Location: Iola, Tx

Postby jwgreen » Fri Jul 22, 2016 10:33 am

Took some measurements from the ones I bought.
IMG_2506.JPG

IMG_2507.JPG

IMG_2508.JPG

IMG_2509.JPG
You do not have the required permissions to view the files attached to this post.
Justin
jwgreen Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 650
Images: 70
Joined: Thu Oct 24, 2013 11:23 am
Location: Iola, Tx
Has thanked: 43 times
Been thanked: 259 times
Location: Iola, Tx

Postby Esteban » Wed Aug 03, 2016 9:58 am

I was looking yesterday at a set of wheel cylinder seals that I have (they were misplaced and found them yesterday :oops: ) They're in a box from the manufacturer, SEIKEN with the following reference:

4518R - 1"

Please note that Seiken is the original manufacturer for the brake seals in the Patrol.

Wheel Cylinder Seal Cups.jpg


If you do a search with the reference above, they are available at Amazon.co.jp (the Japanese site), for a converted $20 for 10 cups, plus shipping. One has to register in this site, since your credentials from the US website don't work.

Maybe we can do a group purchase with a single individual, and then distribute them. In the mean time, I'm trying to source them in Ecuador through Pancho.
You do not have the required permissions to view the files attached to this post.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 2223
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2798 times
Been thanked: 881 times
Location: Ashburn, VA

Postby jwgreen » Wed Aug 03, 2016 5:49 pm

I have a JP account already as I tried to order some stuff from there but some times they will not ship to the U.S.. I will try to look at the site and see if they ship to the US and if we get a group buy together I can assist.

I just checked and it does appear that it cannot be shipped to the US from the Amazon.jp site. Maybe Australia??
Justin
jwgreen Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 650
Images: 70
Joined: Thu Oct 24, 2013 11:23 am
Location: Iola, Tx
Has thanked: 43 times
Been thanked: 259 times
Location: Iola, Tx


Return to Parts and Compatible Parts

Who is online

Users browsing this forum: No registered users and 1 guest