New updated compatible parts list

[jwgreen]

Rear Brake Return Springs, Brand New and Shiny from HGM Lift Parts

Cylinder Side Spring - 44071-30100 $2.85 each

Shoe Side Spring - 44070-35000 $2.85 each

$22.00 for shipping!!

[jwgreen]

Starter 21736HI1 Nissan 23300-C0600

Price $134.95

Source http://store.alternatorparts.com/partno ... 18110.aspx

[moore_rb]

Starter 21736HI1 Nissan 23300-C0600

Price $134.95

Source http://store.alternatorparts.com/partno ... 18110.aspx

If you search Google on the starter model number (18011n) you will get a ton of hits


Here it is for 104.99:

http://www.ebay.com/itm/New-Starter-S11 ... 43ccfe779a

Here it is for 101.00:

http://www.urqualitysolutions.com/New-S ... -18110.htm


Big shout out to BJA for being the test Guinnea Pig on this one...!

[faux40]

Starter 21736HI1 Nissan 23300-C0600 has been added to the parts list at parts.60patrol.com

[ylopez]

YEC dist cup and rotor

[faux40]

YEC dist cup and rotor

Added to the parts DB.

Thanks!

John

[Esteban]

YEC dist cup and rotor

This is probably for the non-water protect distributor.

[Timoun]

I was just about to order two Napa 11190 brake hoses for the front axle of my '65 L60 according to the old compatible parts list, then I checked the updated list to find they supposedly won't fit pre-68 Patrols. I checked the picture on the Napa site and the 11190 looks very close except for having a clip attachment on the female end rather than a nut. Does anyone know if this the only difference? Better yet, does anyone know the right hoses for my '65? I'm tempted to buy one of the 11190 hoses just to see if I can make it work. Thanks!

Update: 27-09-15

In case anyone is interested, the Napa 11190 hose doesn't fit earlier vehicles (at least not a 1965 L60). The length is correct, and the female end will fit the steel brake line on the axle. The clip attachment could replace the original nut attachment. However, the male end of the 11190 is too small for the fitting on the hub backing plate. I now have one new Napa 11190 brake hose in box that's free to anyone who wants to pay the postage. Also, would anyone be kind enough to tell me if they have found the correct hoses for this application?

[Timoun]

$20 USD each. http://www.brakehoses.biz

[RiverPatrol]

A couple of compatible parts found by pub:

Pre-68 brake hoses, axle to hub, O'Reilly #BH 33511

U-joints: O'Reilly by Precision #331