60Patrol

I forgot to add the there are pictures  on page 13 of the web site under "Pictures" listed as Garys '69.

Daner, I had the same problem. Not quite that low though.. To make a long story short. I found that the oil pump was loose and was pumping most of the oil pressure right back into the oil pan. Removed the pump and "freed up" the pressure relief valve.( was sticking and not working properly...

After Many years of sweat and toil I must sell my '69. It has had almost everything rebuilt or replaced. Heater core to complete engine. 5 speed trans from Marks 4wd, Australia. Weber carb. Sony etc. Many extras. To much to mention here.  Over $14,000 invested. Open to bids. E-mail Gary at.  ppostma...

Jerry, All my "research" tells me that all 6 lug wheels have the same bolt hole pattern. The important item is as Dave Collins points out is the center hole diameter and check that the off set is correct. Most stock wheels are very close. Mount one just to make sure. I currently have '85-'...

Fud, I need a working Vaccum Advance unit for my '69 anything like that in your parts?          ................Gary

All of you guys have just popped my ballon. I thought I had something unique on my '69 with the very slow gas tank fill rate.  Although speed varies with gas pumps I have found that turning the nozzle upside down is the fastest. I start out very slow and slowly increase gas flow. Most of the time I ...

Let me suggest that you all try and compare "nissan parts.com" (Not to be confused with "nissan auto parts.com") NP.com is in the State of Washington.  NAP.com  is in Oklahoma. Parts availability is about the same but the prices are signifintly cheaper and turn-around time is le...

Not to change the subject, but has anyone shopped for parts at "nissan parts.com" (Not to be confused with "nissan auto parts.com") NP.com is in the State of Washington.  NAP.com  is in Oklahoma. Parts availability is about the same but the prices are signifintly cheaper and turn...

I just towed my '69 Patrol over 5000miles without a problem. 1) I unlocked the front hubs.(shouldn't be a problem if you have full time hubs) 2) Put the transfer case into 4WD 3) Put the High/Low lever in the center or Neutral position. 4) I always start the engine, put the trans in any gear and see...

Daner, Over the last many years I have always been able to get speedo cables made from scratch at any speedometer shop. Give it a try or try Nissanparts.com.