Search found 17 matches

by npca-eccook
Fri Mar 03, 2006 4:57 pm
Forum: Engine and Mechanical
Topic: Radiator hose/ Heater hose
Replies: 7
Views: 2406

Radiator hose/ Heater hose

   Helo       Gates  cataloge  has listings for both upper and lower radiator  hoses.     Flexible hose listed for top is better.       The heater hose fitting can be removed from the old hose and installed on      the new hose with some delicate surgury.                                   goodlucked
by npca-eccook
Fri Mar 03, 2006 4:48 pm
Forum: Engine and Mechanical
Topic: Radiator Cap
Replies: 6
Views: 1784

Radiator Cap

        Helo Word       The  stant  radiator  cap  I  used  doesn't  quite work. I measured  the distance     from the top  of the  radiator  neck  to where  the radiator cap gasket seats,     and  backed  into  a p/n  using  a Stant  technical  cataloge.       My  radiator  shop guy  says  he can  ...
by npca-eccook
Fri Mar 03, 2006 4:30 pm
Forum: The Archives
Topic: miss
Replies: 12
Views: 4248

miss

Helo  Vike       Check  this website  for  previous missives  about     distributor  inards  . Specificly  point plate slop.                          goodlucked
by npca-eccook
Thu Feb 09, 2006 4:25 pm
Forum: The Archives
Topic: 27 color glossy fotos
Replies: 1
Views: 417

27 color glossy fotos

      BLTRT1         Have 27 color glossy fotos.     Lost your address.     Please E-mail me again.                                       Sorry about that                                                    Ed
by npca-eccook
Sun Nov 13, 2005 5:06 pm
Forum: The Archives
Topic: Conversion from positive earth..
Replies: 8
Views: 1659

Conversion from positive earth..

                   Having thot about alternator and starter wiring for a bit , I was wrong when i said    i wuz wrong.      Once you have disconnected every electrical gizmo and then switched battery    cables , nothing should happen.      But ,  now you have a buggy with negative ground.      "...
by npca-eccook
Thu Nov 10, 2005 4:56 pm
Forum: The Archives
Topic: Conversion from positive earth..
Replies: 8
Views: 1659

Conversion from positive earth..

    Esteban , thank yew kindly for correcting me.     Isolating alternator is problematic.     I'm not quite convinced about starter rotation , which I forgot to address.                               thanks ed   
by npca-eccook
Sat Nov 05, 2005 10:10 am
Forum: Engine and Mechanical
Topic: I Need Some Help with a parts List for my 69 KL60
Replies: 5
Views: 1238

I Need Some Help with a parts List for my 69 KL60

  Helo       Most of the parts you need are listed on this site under "interchangeable parts"      category.       Gates hose cataloge lists upper and lower raditor hoses and I thimk bypass hose.      Listing for upper radiator hose includes generic flexible hose , which installs      alit...
by npca-eccook
Sat Nov 05, 2005 9:47 am
Forum: The Archives
Topic: Conversion from positive earth..
Replies: 8
Views: 1659

Conversion from positive earth..

  Subject : conversion from positive earth to negative ground     Most components will be unaffected.     Affected components include  fan motor , wiper motor , instrument cluster ,   and generator.     Electric motors will run with reverse rotation.. For wiper motor this may not matter   It is poss...
by npca-eccook
Sat Nov 05, 2005 9:28 am
Forum: The Archives
Topic: Electrical gremlins
Replies: 2
Views: 530

Electrical gremlins

  Subject : Electrical Gremlins     Ground or earth circuit is often overlooked especially at the factory.      Rather that restore, preserve, and protect all 9000 built -in weaknesses ,      Provide ground strap for all gizmos that consume power.      For example, ground strap for steering gearbox ...
by npca-eccook
Sat Oct 29, 2005 10:38 am
Forum: Suspension & Steering
Topic: Front wheel bearing adjustment
Replies: 2
Views: 2543

Front wheel bearing adjustment

  Subject : Front wheel bearing adjustment       Factory shop manuals for 1963 & 1978  60 series patrol state " tighten nut  until brake drum binds when turned. Then loosen nut 1/8 turn. This should ...     Hub turning torque must be within  13 - 39  in-lbs. "       The point at which ...