60Patrol

Patrol is located in Denver Co. for larger parts i might consider a road trip to meet someone half way

hood is pretty straight needs 1 hinge the other is ok. 75.00?? 

I'd let the motor go for 400.00 that would be complete including rebuild gasket and bearings

Just too much of a hassle.....parting out or sell all 67 'TROL 95% complete including gasket set and bearings for the engine rebuild very little rust. Completely torn down to the frame and axles. Make me an offer cash or trade

set the timing marks to top dead center if the valve cover is off all the better ( make sure number one cyl valves are both closed) reinsert the dist.pointing the rotor at number one plug wire. at that point you can only be right on or 180 degrees off.  If rocker arms were exposed you should be righ...

can anyone tell me the proper size socket for the nut that must be removed on the inside of the transfer case to seperate it from the transmision ? My 12" cresent opens to an inch and a half and that isn't near big enough.       Thanks     Pat

this is great news. i'm just about to pull the tub off of a 67 that i intend to do a total restoration of. sandblasting and power washing are next. Lots of parts after that. please keep up posted.      

just in case anyone is still looking for a hard copy of the service manual or the P engine manual I have found both available at www.booksforcars.com not exactly cheap but what do we expect     Pat

Guess I should have mentioned i have a 67 patrol

I've found a lot of great info on this site. Hope someone can help with just a few more parts sources so i can complete my engine rebuild. Someone posted a phone # for a source if a rebuild gasket set but i cant't seem to find it again. I still need a head gasket as well as push rods lifters and val...