60Patrol

Finally replaced the bent drag link with the one from my parts rig. http://www.60patrol.com/forum/gallery/image.php?album_id=204&image_id=3948 I didn't realize how severe the bend was until I laid them out side-by-side (forgot to snap a pic). I hadn't realized that the ability to turn the wheels...

This is the Wilwood that has already had the modification made so it will bolt right up to the stock firewall: http://www.ebay.com/itm/Datsun-510-620-Z-240Z-260Z-280Z-280ZX-New-1-Brake-Master-Cylinder-WILWOOD-/400890695064?hash=item5d56f28d98&vxp=mtr Hmm. I am wondering what modification they a...

1) The rod is not fully disengaging from the piston when you release the pedal, and is keeping pressure in the system. 2) The brake springs are not "pulling" the pistons on the wheel cylinders back in when the pedal is released (this action is what "pushes" the fluid back up int...

You can get a Wilwood dual master that will bolt right up to the Patrol. It is the one that has already been modified to fit the Z. It runs about $200, you can find it on eBay sometimes. Search here for Wilwood and you'll probably find a link. Do you have any information on exactly which model? Wha...

So lately I have found that my current master cylinder, the Ford "Fruit Jar" as you call it, has been sticking. It locks the brakes up and the only way to release them is to bleed the master. After I bleed it, it seems to operate fine for a while before it decides to seize up again. Any id...

There is this listing for an aftermarket dual reservoir master cylinder fitting 73-80 G60 Patrols. http://www.ebay.com/itm/Brake-Master-Cylinder-assy-Nissan-Patrol-G60-4-0-P40-73-80-/231396136565?pt=LH_DefaultDomain_15&hash=item35e048d675&vxp=mtr What about this part would make it incompatib...

faux40 wrote:Funny you should ask... I can't swear by the accuracy, but these are from my gauge.

-- Here's the data --

John

Unbelievable that you have this much data about the fuel gauge. I'm glad you saw my question because your response is extremely helpful. Thanks!

Does anybody know the ohm range of the fuel tank sending unit? The gauge I have now, which is aftermarket, only registers full or empty with basically nothing in between. I need to get a new one that has the correct ohm range.

My wife was watching a new show called State of Affairs and she called me in with an excited voice. There was a nice tan patrol that got a lot of screen time so I thought I would share. http://www.nbc.com/state-of-affairs/episode-guide/season-state-of-affairs/ghosts/108 Unfortunately you have to suf...

I sprayed the insides of my doors with bed liner stuff in a can and installed my door panels with new stainless steel fasteners.