1980 Final Parts Catalog

Service Manuals, Owner's Manuals, Parts Manuals, etc

Postby azsteve » Thu May 09, 2013 6:24 pm

Here it is, long overdue. Sorry about the delay, but it did have to make it here from Kuwait, after all...

Printed 1980, Document # C-0060L. This is the final printing parts catalog for the Patrol so if there are parts available these numbers are as good as it gets for tracking them down, I believe.

Image quality is as good as my scanner could do, which accounts for the large memory size of the file. I didn't get it pro scanned after I checked my bank account... :twocents-02cents: ... :doh: ...but I will get that done within a few months as well as getting a duplicate printed and bound for the 60patrol "lending library". It is text searchable and I added a few bookmarks for the major sections.

It is not an original printing... which peeves me a bit :x . This is a recently printed document that was done from a decent scan job on a crappy scanner. While it didn't say in the ebay ad that it was an original printing... it also didn't say that it wasn't, which I would have appreciated. But hey, what can ya do?

Just in case anyone didn't know... the individual parts can be re-combined into one document very easily. :romance-grouphug:

Btw, Leslie, you were right about the dimensions... 8.5" x 7.25". what a weird waste-of-paper size... :?:

Enjoy!
Share!!!

1253
You do not have the required permissions to view the files attached to this post.
1966 L60 Patrol

"Hey, watch this...!"
-probably what my last words will be.
azsteve Offline


You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 227
Images: 13
Joined: Mon Jan 07, 2013 5:52 pm
Location: phoenix, AZ
Has thanked: 59 times
Been thanked: 51 times
Location: Phoenix AZ

Postby RiverPatrol » Thu May 09, 2013 6:39 pm

Awzum! :D The quality seems to be pretty good at first glance, I've seen much worse. Definitely useable.

Sorry that you didn't know that it was a reproduction copy. I think they were still distributed by Nissan. It doesn't make it any less desirable, IMO. ;)

Thanks for all the effort to get this done. Good stuff. :D
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5523
Images: 715
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3160 times
Been thanked: 1057 times
Location: Temecula, CA

Postby bosque » Sat Sep 21, 2013 8:37 pm

I cannot see 1/3 of the pages within each section. They are listed as pages but blank.??? Do you see each and evry page?
bosque Offline


Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 1622
Images: 62
Joined: Thu Oct 04, 2012 8:35 am
Location: Bishop, CA
Has thanked: 311 times
Been thanked: 175 times
Location: Bishop/Mammoth Lakes, CA

Postby RiverPatrol » Sat Sep 21, 2013 10:11 pm

bosque wrote:I cannot see 1/3 of the pages within each section. They are listed as pages but blank.??? Do you see each and evry page?


Yes, I was just looking at it today.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5523
Images: 715
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3160 times
Been thanked: 1057 times
Location: Temecula, CA

Postby bosque » Sat Sep 21, 2013 10:26 pm

Odd. I just deleted the downloads and re-downloaded part 1 and again pages with no image nor text. No clue.......... :oops: :?
bosque Offline


Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 1622
Images: 62
Joined: Thu Oct 04, 2012 8:35 am
Location: Bishop, CA
Has thanked: 311 times
Been thanked: 175 times
Location: Bishop/Mammoth Lakes, CA

Postby Esteban » Sun Sep 22, 2013 3:02 am

Try opening with Adobe Reader if you are using a different pdf viewer. I think the same problem happened to me with the Komatsu manual.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 1955
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2169 times
Been thanked: 727 times
Location: Ashburn, VA

Postby miller » Mon Sep 23, 2013 4:23 pm

It's not just you Dave, I can't see it either.
Image
1964 MWB Soft top Patrol - 1972 MWB Soft top Patrol "Diablo" - 1977 MWB V8 "Mr Muck" - 1978 G60 Patrol Ute "HP"
miller Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 1077
Images: 95
Joined: Wed Dec 05, 2012 4:25 pm
Has thanked: 84 times
Been thanked: 325 times
Location: Geelong, Australia

Postby RiverPatrol » Mon Sep 23, 2013 9:26 pm

miller wrote:It's not just you Dave, I can't see it either.


Which section/s?

I downloaded all 8 sections, then concatenated them together. I just scanned through the entire manual and it all displays fine.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5523
Images: 715
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3160 times
Been thanked: 1057 times
Location: Temecula, CA

Postby Esteban » Mon Sep 23, 2013 9:56 pm

I can't understand what the problem is. If I open with Adobe Reader everything is there, but very slow to refresh each page. If I open with Foxit Reader -which I prefer- most of the pages are blank.

Will try a couple of tricks tomorrow to see if they can be corrected.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 1955
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2169 times
Been thanked: 727 times
Location: Ashburn, VA

Postby RiverPatrol » Tue Sep 24, 2013 10:23 am

I am using Adobe Reader version 10.1.7 on a Mac.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5523
Images: 715
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3160 times
Been thanked: 1057 times
Location: Temecula, CA

Postby Esteban » Tue Sep 24, 2013 11:15 am

Seems that Adobe is dedicating this one!

I took a screen shot of the two programs opened at the same time, in the same page #7 of the first part of the download. At Foxit Reader on the left, it's blank. The one on the right is Adobe. Versions are noted. Using another pdf viewer, PDF Architect, I can see all the content. However, it's slow to load each page compared with other documents or manuals.

1980 Parts Manual problem.jpg
You do not have the required permissions to view the files attached to this post.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 1955
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2169 times
Been thanked: 727 times
Location: Ashburn, VA

Postby bosque » Tue Sep 24, 2013 11:22 am

Hey all,
I really think I do have a problem with my adobe reader so please don't spin your wheels too much. I will reinstall. Thanks for the feedback. Main thing is seeing this great source. Thanks again to AZSteve......where the hell are you BTW? :think:
bosque Offline


Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 1622
Images: 62
Joined: Thu Oct 04, 2012 8:35 am
Location: Bishop, CA
Has thanked: 311 times
Been thanked: 175 times
Location: Bishop/Mammoth Lakes, CA

Postby miller » Tue Sep 24, 2013 10:49 pm

I just opened it at home and it works fine. Older version of Adobe at work is probably the issue.

Good read!
Image
1964 MWB Soft top Patrol - 1972 MWB Soft top Patrol "Diablo" - 1977 MWB V8 "Mr Muck" - 1978 G60 Patrol Ute "HP"
miller Offline

User avatar
I love driving my Patrol!
I love driving my Patrol!
 
Posts: 1077
Images: 95
Joined: Wed Dec 05, 2012 4:25 pm
Has thanked: 84 times
Been thanked: 325 times
Location: Geelong, Australia

Postby Virago » Sat May 06, 2017 9:01 am

Thanks for this
I've downloaded the catalog. My Patrol is 1970. Do you know if fenders are interchangeable? Probably not. Any ideas on where to find new or used fenders for 60 series?
Virago Offline


Lurker
Lurker
 
Posts: 2
Joined: Fri May 05, 2017 11:46 pm
Has thanked: 0 time
Been thanked: 0 time
Location: Kelowna, BC

Postby RiverPatrol » Sat May 06, 2017 9:51 am

The fenders from a '68 and '69 would be compatible for yours.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5523
Images: 715
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3160 times
Been thanked: 1057 times
Location: Temecula, CA


Return to Manuals

Who is online

Users browsing this forum: No registered users and 1 guest