Page 1 of 1

1980 Final Parts Catalog

PostPosted: Thu May 09, 2013 6:24 pm
by azsteve
Here it is, long overdue. Sorry about the delay, but it did have to make it here from Kuwait, after all...

Printed 1980, Document # C-0060L. This is the final printing parts catalog for the Patrol so if there are parts available these numbers are as good as it gets for tracking them down, I believe.

Image quality is as good as my scanner could do, which accounts for the large memory size of the file. I didn't get it pro scanned after I checked my bank account... :twocents-02cents: ... :doh: ...but I will get that done within a few months as well as getting a duplicate printed and bound for the 60patrol "lending library". It is text searchable and I added a few bookmarks for the major sections.

It is not an original printing... which peeves me a bit :x . This is a recently printed document that was done from a decent scan job on a crappy scanner. While it didn't say in the ebay ad that it was an original printing... it also didn't say that it wasn't, which I would have appreciated. But hey, what can ya do?

Just in case anyone didn't know... the individual parts can be re-combined into one document very easily. :romance-grouphug:

Btw, Leslie, you were right about the dimensions... 8.5" x 7.25". what a weird waste-of-paper size... :?:

Enjoy!
Share!!!

1253

Re: 1980 Final Parts Catalog

PostPosted: Thu May 09, 2013 6:39 pm
by RiverPatrol
Awzum! :D The quality seems to be pretty good at first glance, I've seen much worse. Definitely useable.

Sorry that you didn't know that it was a reproduction copy. I think they were still distributed by Nissan. It doesn't make it any less desirable, IMO. ;)

Thanks for all the effort to get this done. Good stuff. :D

Re: 1980 Final Parts Catalog

PostPosted: Sat Sep 21, 2013 8:37 pm
by bosque
I cannot see 1/3 of the pages within each section. They are listed as pages but blank.??? Do you see each and evry page?

Re: 1980 Final Parts Catalog

PostPosted: Sat Sep 21, 2013 10:11 pm
by RiverPatrol
bosque wrote:I cannot see 1/3 of the pages within each section. They are listed as pages but blank.??? Do you see each and evry page?


Yes, I was just looking at it today.

Re: 1980 Final Parts Catalog

PostPosted: Sat Sep 21, 2013 10:26 pm
by bosque
Odd. I just deleted the downloads and re-downloaded part 1 and again pages with no image nor text. No clue.......... :oops: :?

Re: 1980 Final Parts Catalog

PostPosted: Sun Sep 22, 2013 3:02 am
by Esteban
Try opening with Adobe Reader if you are using a different pdf viewer. I think the same problem happened to me with the Komatsu manual.

Re: 1980 Final Parts Catalog

PostPosted: Mon Sep 23, 2013 4:23 pm
by miller
It's not just you Dave, I can't see it either.

Re: 1980 Final Parts Catalog

PostPosted: Mon Sep 23, 2013 9:26 pm
by RiverPatrol
miller wrote:It's not just you Dave, I can't see it either.


Which section/s?

I downloaded all 8 sections, then concatenated them together. I just scanned through the entire manual and it all displays fine.

Re: 1980 Final Parts Catalog

PostPosted: Mon Sep 23, 2013 9:56 pm
by Esteban
I can't understand what the problem is. If I open with Adobe Reader everything is there, but very slow to refresh each page. If I open with Foxit Reader -which I prefer- most of the pages are blank.

Will try a couple of tricks tomorrow to see if they can be corrected.

Re: 1980 Final Parts Catalog

PostPosted: Tue Sep 24, 2013 10:23 am
by RiverPatrol
I am using Adobe Reader version 10.1.7 on a Mac.

Re: 1980 Final Parts Catalog

PostPosted: Tue Sep 24, 2013 11:15 am
by Esteban
Seems that Adobe is dedicating this one!

I took a screen shot of the two programs opened at the same time, in the same page #7 of the first part of the download. At Foxit Reader on the left, it's blank. The one on the right is Adobe. Versions are noted. Using another pdf viewer, PDF Architect, I can see all the content. However, it's slow to load each page compared with other documents or manuals.

1980 Parts Manual problem.jpg

Re: 1980 Final Parts Catalog

PostPosted: Tue Sep 24, 2013 11:22 am
by bosque
Hey all,
I really think I do have a problem with my adobe reader so please don't spin your wheels too much. I will reinstall. Thanks for the feedback. Main thing is seeing this great source. Thanks again to AZSteve......where the hell are you BTW? :think:

Re: 1980 Final Parts Catalog

PostPosted: Tue Sep 24, 2013 10:49 pm
by miller
I just opened it at home and it works fine. Older version of Adobe at work is probably the issue.

Good read!

Re: 1980 Final Parts Catalog

PostPosted: Sat May 06, 2017 9:01 am
by Virago
Thanks for this
I've downloaded the catalog. My Patrol is 1970. Do you know if fenders are interchangeable? Probably not. Any ideas on where to find new or used fenders for 60 series?

Re: 1980 Final Parts Catalog

PostPosted: Sat May 06, 2017 9:51 am
by RiverPatrol
The fenders from a '68 and '69 would be compatible for yours.