Page 1 of 2

1980 Final Parts Catalog

PostPosted: Thu May 09, 2013 6:24 pm
by azsteve
Here it is, long overdue. Sorry about the delay, but it did have to make it here from Kuwait, after all...

Printed 1980, Document # C-0060L. This is the final printing parts catalog for the Patrol so if there are parts available these numbers are as good as it gets for tracking them down, I believe.

Image quality is as good as my scanner could do, which accounts for the large memory size of the file. I didn't get it pro scanned after I checked my bank account... :twocents-02cents: ... :doh: ...but I will get that done within a few months as well as getting a duplicate printed and bound for the 60patrol "lending library". It is text searchable and I added a few bookmarks for the major sections.

It is not an original printing... which peeves me a bit :x . This is a recently printed document that was done from a decent scan job on a crappy scanner. While it didn't say in the ebay ad that it was an original printing... it also didn't say that it wasn't, which I would have appreciated. But hey, what can ya do?

Just in case anyone didn't know... the individual parts can be re-combined into one document very easily. :romance-grouphug:

Btw, Leslie, you were right about the dimensions... 8.5" x 7.25". what a weird waste-of-paper size... :?:

Enjoy!
Share!!!

1253

Re: 1980 Final Parts Catalog

PostPosted: Thu May 09, 2013 6:39 pm
by RiverPatrol
Awzum! :D The quality seems to be pretty good at first glance, I've seen much worse. Definitely useable.

Sorry that you didn't know that it was a reproduction copy. I think they were still distributed by Nissan. It doesn't make it any less desirable, IMO. ;)

Thanks for all the effort to get this done. Good stuff. :D

Re: 1980 Final Parts Catalog

PostPosted: Sat Sep 21, 2013 8:37 pm
by bosque
I cannot see 1/3 of the pages within each section. They are listed as pages but blank.??? Do you see each and evry page?

Re: 1980 Final Parts Catalog

PostPosted: Sat Sep 21, 2013 10:11 pm
by RiverPatrol
bosque wrote:I cannot see 1/3 of the pages within each section. They are listed as pages but blank.??? Do you see each and evry page?


Yes, I was just looking at it today.

Re: 1980 Final Parts Catalog

PostPosted: Sat Sep 21, 2013 10:26 pm
by bosque
Odd. I just deleted the downloads and re-downloaded part 1 and again pages with no image nor text. No clue.......... :oops: :?

Re: 1980 Final Parts Catalog

PostPosted: Sun Sep 22, 2013 3:02 am
by Esteban
Try opening with Adobe Reader if you are using a different pdf viewer. I think the same problem happened to me with the Komatsu manual.

Re: 1980 Final Parts Catalog

PostPosted: Mon Sep 23, 2013 4:23 pm
by miller
It's not just you Dave, I can't see it either.

Re: 1980 Final Parts Catalog

PostPosted: Mon Sep 23, 2013 9:26 pm
by RiverPatrol
miller wrote:It's not just you Dave, I can't see it either.


Which section/s?

I downloaded all 8 sections, then concatenated them together. I just scanned through the entire manual and it all displays fine.

Re: 1980 Final Parts Catalog

PostPosted: Mon Sep 23, 2013 9:56 pm
by Esteban
I can't understand what the problem is. If I open with Adobe Reader everything is there, but very slow to refresh each page. If I open with Foxit Reader -which I prefer- most of the pages are blank.

Will try a couple of tricks tomorrow to see if they can be corrected.

Re: 1980 Final Parts Catalog

PostPosted: Tue Sep 24, 2013 10:23 am
by RiverPatrol
I am using Adobe Reader version 10.1.7 on a Mac.