internal distributer wiring....??

[hoyt]

hello.....I have a 67 patrol....there are 4 different wires under the distributer cap...
I should have taken a picture before I removed anything....
can some one please...take a close up picture under the cap, with rotor removed so I can be
sure of all 4 wires connected properly....my memory is poorly to say the least....
its obvious where some wires go...please someone help me.....
will be much appreciated!
hoyt

[r1lark]

Hoyt, here are some I took of my waterproof distributor before disassembly/cleanup, and after, hope this helps you:

DSC08448 resized.jpg

DSC08459 resized.jpg

DSC08467 resized.jpg

DSC08449 resized.jpg

DSC08450 resized.jpg

[hoyt]

most grateful lark.....speedy reply!......the best to you
hoyt

[r1lark]

most grateful lark.....speedy reply!......the best to you
hoyt

You are very welcome hoyt, rarely can I provide input on questions posted on this forum.......but I do try to pay it forward when possible, since so many here have helped me! I have a few more pics, but still basically the same views, hopefully you were able to see what you needed.

[timber]

Paul,

How did you clean it up so well?

Tom

[r1lark]

Paul,

How did you clean it up so well?

Tom

NOS points and condenser helped a lot. Basically took the top half apart including pulling the point plate out to get to the advance mechanism underneath. Gave everything a good cleaning and reassembled. Cleaned and painted the outside housing also.

More pics and info on the first page of my Patrol's thread here: https://60patrol.com/forum/viewtopic.php?f=21&t=6242